                           RNDesign Systems

Grating is very simple to use.                                        2/18/2000

After putting the EXE file in a directory of your choice:

1. Load your printer with suitable clear mylar material.
2. Run Grating.exe
3. Select the resolution of the grating you want.
4. Select the resolution of the printer you are using. 600dpi is normal for a laserjet.
5. Set the number of copies you want.
6. Setup the printer using the printer setup button.
7. Print the gratings using the print button.
8. VOILA!!  You have diffraction gratings.

Note unless there is a huge demand for it 'A' size (8.5"x11") is the only size media
that is created.

NO warranty is given for the use of this software. It sure can't hurt anything. 
But in the odd event that something gets screwed up I have NO nor do I claim ANY
responsibility.