Step by Step Burning PS2 Games

(1) If you have a mod chip

If you don't have a mod chip for your ps2, dont worry you can still play backups of your games, It's just alot more hassle. So i would advise you to get one.

http://www.modchip.com/

If you do have a chip scroll down to (2)

Part A: Extract ISO image to hard-drive

Open CDRWin
Click the Extract Disc/Tracks/Sectors (Middle button on the top row) A new window will now appear. Here are the settings, shown in the picture here.
Extract Mode: Disc Image/Cuesheet
CD Reader: Select your reader
Image Filename: Select a directory and filename Reading Options
RAW, CD+G, CD-TEXT, MCN / ISRC all unchecked
Error Recovery: Ignore
Jitter Control: Disable
Subcode Analysis: Auto
Data Speed: Select your speed
Audio Speed: Select your speed
Read retry count: Anything from 2-10
Subcode Threshold: 300
Click Save Settings if you wish
Click Start!

CDRWin will now save the image to your hard-drive.

Part B: Patching Image

Open AddZer0 FrontEnd.
Browse for your input file. You just made it with CDRWin.
Do the same for the output file.
Select the type of patch to apply to your image.

Auto Mode converts the current Input Image to a 2048 ISO. The image is then patched, placing system.cnf at LBA 12231. This requires no other help from you.

Normal Mode functions just as the original version of AddZer0 did. If you select this mode, type the LBA of the closest file to LBA 12231 into the text box. (You need ISO Buster) This will move this file to 12232 and place the system.cnf at 12231.

Patcher Mode functions just like the 2SP Patcher did. It blindly takes the system.cnf file and places it at 12231. This will possibly corrupt data of the image which cause problems while playing the game. Therefore this mode is not recommended.

When you are happy with the settings, click Convert.
Wait for the process to finish (might take a while)
Part C: Burning image

Open CDRWin again.
Click the File Backup and Tools button.
Change Backup/Tool Operation to Record an ISO9660 image file.
Where it says Image Filename: Browse for the image you have just patched.
CD Recorder: Select your CD-Writer
Disc Type: CDROM-XA
Track Mode: MODE 2
Select your write speed.
Click Start.
Wait for CDRWin to write the image to a CD-R.

You should have successfully made a backup of your PS2 game.

--------------------------------------------------------------------------------

(2) If you don't have a mod chip.

I suggest you use CloneCD or CDRWin to do a straight CD copy. This gives you an un-patched backup.

If you have CloneCD or CDRWin (UTFSE) here are the settings:

CloneCD

Open CloneCD.
Click the Copy CD Picture (3rd Picture along)
Read Tab
Select your CD Reader.
Select your read speed. I suggest you keep it low. Sorry if you have little patience.
Read SubChannel Data from Data Tracks: Checked
Read SubChannel Data from Audio Tracks: Checked
The other boxes can be left unchecked.
Image File Tab
Browse for the directory that you want the image file to be extracted to.
Check the Delete After Successful Write box if you want.
Write Tab
Select your CD Writer.
Select your write speed. I strongly suggest you burn at a maximum of 4x.
Everything should be all right as it is.
Ignore the Global tab. It is not important.
Now click the Start Disc Copy button at the bottom.
CloneCD will then read the disc and when finished write to a blank disc.
Finished.
CDRWin

Open CDRWin.
Click the Backup Disc button (Second along)
Backup Mode: Copy To Image And Record
Image disk: Select your hard drive (Default)
CD Reader & CD Recorder: Set CD reader & CD recorder to the same (Always read with burner)
Reading Options
Read: Raw Sectors
Error Recovery: Ignore
Jitter Control: Disable
Subcode Analysis: Auto
Data Speed: Select Your Speed (Keep it low)
Audio Speed: Select Your Speed (Keep it low)
Read Retry Count: Select How Many Times You Want CDRWin To Retry Reading Damaged Data Before It Fails
Recording Options
Uncheck All Boxes On The Top Line
Number Of Discs To Backup: Select Number Of Discs
Number Of Copies: Select Number Of Copies You Want
Speed: Select Your Burning Speed (Keep it low)
Disc Transporter Mode: Disable If you want, select Save Settings at the side
Hit Start.

SUBMITTED BY A3ON