--- Joint-rolling ---

This is my way to make a perfect joint, take some joint paper and a pair of scissors, cut a piece of the joint pack for use to joint filter, you can use a knife to.

Find a sharp egde from a table or something like that and roll the piece of filter, it will make it easyer to roll the joint filter and it is nice to have a perfect round joint.

Take the scissors and cut a little of the filter, like you see on the photo, because the joint has to be conic and not straight. Don’t trow away the little piece you’ve cut of, we will use it later.

Take a joint paper and cut it in half, this piece of paper is only for use to the joint filter. I always use 2 pieces of joint paper to make a perfect joint, you can also use one, but this is easier my way :o)

Now when you have rolled your joint filter, you see that the joint’s filter needs a little filter to stop tobaco and hash/ marihuana from falling into your mouth, take the little piece from the filter and make stairs, like you see.

Take the little filter (stairs) and put into the joint filter and now you have a perfect joint filter.

Now it's time to roll your joint ...

Here I cut some of the joints paper, as you see at the photo, because why smoke more paper then necessary. Now it is up to you how to roll your joint. My way is, first make the joint and then put in the mix (hash and toasted tobaco)

Here you see my finished made joint with filter (the long one) ready to put in some smoke and the other one is one of the cones you can buy, but I dont like the filters, they are to short, I like a long filter. This was my way to make a perfect joint. Stay cool and happy!