# Series Connected Solar Panels

## How Series Connected Solar Panels Increase Voltage

Understanding how **series connected solar panels** can produce more output voltage is an important part of any solar system design and understanding a few basic principles when connecting different solar panels together will help designing and installing a photovoltaic system to power your home a whole lot easier.

Photovoltaic solar panels are semiconductor devices that covert sunlight (irradiance) into electrical DC energy but it is the PV panels individual *solar cells* which are responsible for converting the sunlight into electricity. However, the power output from any type of PV panel is very much dependent upon the intensity of the sunlight falling on its surface as well as its orientation, operating temperature and the connected load.

Solar cells are made of specially treated silicon material and designed to absorb as much sunlight as possible. Solar PV cells are interconnected electrically in series and parallel connections within a panel (module) to produce the desired output voltage and/or current values for that panel. Typically, solar PV panels consist of 36, or 60, or 72 interconnected solar cells.

Most silicon solar cells produce about 0.5 to 0.6 volts DC, which is the main characteristic of a pn-junction, when there is no external load connected. If there is no-load connected, or a very low current demand, a photovoltaic cell generates its maximum output voltage, commonly called its open-circuit voltage, V_{OC}.

As the load current demand from the cell increases, brighter sunlight (given in watts per metre squared, W/m^{2}) is required to produce the full output voltage. However, there is a maximum limit to the amount of current a solar cell can generate no matter how bright and intense the irradiance of the light.

While individual solar cells can be interconnected together within a single PV panel, solar photovoltaic panels can themselves be connected together in series and/or parallel combinations to form an array increasing the total available power output for a particular solar application compared to a single panel.

### Series Connected Solar Panels

Photovoltaic panels are rated by their total power output, or peak watts, W_{P}. For example, 50 Watts, 100 Watts, 245 Watts, etc. so several of these panels connected together can produce a substantial amount of solar power capable of powering a home. Then connecting solar panels together is a simple and effective way of increasing your solar power capabilities but its important to understand how series connected solar panels behave.

## How to Connect Solar Panels in Series

All photovoltaic solar panels produce an output voltage when exposed to sunlight and we can increase the voltage output of the panels by connecting them in series. That is connecting solar panels in series increases the voltage of the system, so two panels connected in series will produce double the voltage as compared to just one panel but while the voltages add up, the amperage of each panel stays the same, that is currents in series do not add up.

When solar photovoltaic panels are wired electrically in series, the negative (-) terminal of the first panel is connected to the positive (+) terminal of the next (second) panel, and the negative (-) of the second panel is connected to the positive (+) of the third panel, and so on until all the panels are connected together.

Series connected solar panels are called a **string**, thus the use of the word “string” means that the panels are connected in series. Note that series strings of PV panels can be connected in parallel to increase the total current and therefore more power output.

### Series Connected Solar Panels of the Same Type

Here ALL the solar PV panels are of the same type and power rating. The total voltage output becomes the sum of the voltage output of each panel but the series string current is equal to the panel currents as shown.

Using the same three 12 volt, 5.0 ampere pv panels as shown above, we can see that when they are clearly connected together in a series string, the combined string produces a total of 36 volts (12 + 12 + 12) at 5.0 amps, giving total string wattage of 180 watts (volts x amps), compared to the 60 watts of one single panel.

Thus, if the series string consisted of “n” number of solar pv panels with exactly the same characteristics, then the series string voltage would be V_{1} times “n” (V*n) volts with the output current being equal to I_{1}. Thus the total power output of the string will be equal to V*I*n watts.

Now lets look at connecting solar panels in series with different nominal voltages but with identical current ratings.

### Series Connected Solar Panels of Different Voltages

In this method all the solar panels are of different types and therefore power rating but have a common current rating. When the panels are connected together in series, the voltages still add the same as before so the string produces 36 volts DC at 5.0 amps, producing 180 watts. Again the output voltage will depend on the number of connected panels but the string amperage remains the same at 5.0 amperes.

Note that while the manufacturers will state a standard panel voltage (6, 12, 24, 48 Volts, and so forth) which changes very little with irradiance, the open-circuit voltage, V_{OC} (that is the voltage measured when I = 0) of a panel however could be as much as 25% higher than the panels nominal voltage rating resulting in excessive overvoltage for large strings.

Then while our simple example has a nominal voltage of 36 volts, it could potentially be higher at 45 volts (36*1.25). Then it is this voltage level that needs to be taken into consideration when connecting series strings to battery charge controllers, inverters, voltage converters, or DC loads, etc.

Lets look at connecting solar panels in series with the same voltages but different current ratings.

### Series Connected Solar Panels of Different Currents

In this method all the solar panels are of different current rating but have the same nominal voltage. The individual panel voltages will still add together as before, but this time the amperage will be limited to the value of the lowest panel in the series string, in this case 1 ampere. Then the series string will produce 36 volts at 1.0 amp only.

Then no matter the actual maximum power rating of the connected panels, it will be the pv panel with the lowest current rating that decides the total power output of the series string. For example, our three panels above have individual power ratings of:

So the total expected wattage from the three PV panels comes to 108 watts, but the power available to the connected load is only 36 (36 volts times 1 ampere) watts clearly reducing the strings actual wattage to about 33% of maximum, thereby wasting money on the purchase of the higher wattage solar panels. Connecting solar panels in series with different current ratings should only be used provisionally, because as we have seen, the solar pv panel with the lowest rated current is the one which determines the current output of the whole array.

Now let us look at connecting solar panels in series with different wattage ratings as this is the most common scenario.

### Solar Panels in Series of Different Wattage’s

Here let us assume we have three solar pv panels of 40 watts, 100 watts, and 180 watts each connected together in a series string. You may assume that the total wattage, P_{T} will be 320 watts (40 + 100 + 180), but this would not be the case. As we know the nominal voltage rating of each panel, we can use Ohms Law to determine the current strength of each panel and find the true output power rating of the series string.

### Solar Panel Current Ratings

Thus for Panel 1.

P_{1} = 40 watts, V_{1} = 6 volts, I_{1} = 6.67 amperes

and for Panel 2.

P_{2} = 100 watts, V_{2} = 12 volts, I_{2} = 8.33 amperes

and Panel 3.

P_{3} = 180 watts, V_{3} = 24 volts, I_{3} = 7.50 amperes

As we have seen previously that the voltages add together so the total output voltage, V_{T} will be 42 volts (6 + 12 + 24). However, the output current is limited by the panel with the lowest current output, which is panel No1 at 6.67 amperes. Then the series string will produce a maximum output power of only 280 watts (42 x 6.67), which is 12.5% lower than the expected 320 watts, thus the pv array is only operating at 87.5% efficiency at full sun.

### Final Series String Connection

## Series Connected Solar Panels Summary

We have seen here series connected solar panels increase a strings voltage. Thus “series connected solar panels are about voltage” as V_{T} = V_{1} + V_{2} + V_{3} + V_{4}, etc. therefore series wiring = more voltage. How many pv panels you connect per series string depends on what amount of voltage you are aiming for or the number of solar panels you have available, but you MUST take into consideration the strings possible open-circuit voltage, V_{OC} value at all times when connecting to battery regulators and controllers.

While the voltage may increase, the string current will equal the lowest panel amperage. If all the solar panels have the same electrical characteristics then the string will produce 100% of the available power at full sun (1000 W/m^{2}). If the series connected pv panels are of different wattage’s and ratings, then the string current is limited to the lowest panel current reducing the efficiency of the string even at maximum irradiance.

Panels of different types, monocrystalline or polycrystalline or with different W_{P} wattage values, for example 40 watt together with 50 watt should not be connected in series as they would not produce the expected 90 watts (40 + 50) output power as the lower panel would control the string, thereby wasting your money on the larger 50 watt panel.

Solar photovoltaic panels are a great way of producing electrical power for free and are available in a range of wattage values from less than 10 watts to over 200 watts to suit many solar applications. But in order to achieve the highest efficiency from your series string, positioning, sun angle and the amount of irradinace are just as important as using the same model of solar panel. That is whether they are connected together in series or are parallel connected solar panels. A little thought will save you money.

For more information about **series connected solar panels**, or to obtain more information about the different types of solar panels available, or to explore the advantages and disadvantages of using series connected solar panels to power your home, then Click Here to order your copy from Amazon today and learn more about designing, wiring and installing off-grid series connected solar panels to create a photovoltaic solar electric systems for your home.

Some high quality solar panels you may be interested in which can be connected together and used in solar arrays.

Good