We installed the River Beast Kustom rear shackle inversion kit which netted 7 inches of lift to match the front spring over.
My brother, Heath, relocated my rear shock mounts and built a custom steering rod out of 7/8 rod and hien joints. I also changed to 4.27 gears. This helps out with the 35 inch BFGs. I also went to 15 x 10 inch "ol'School" wheels.
Cross Over Steeering
Here is the steering. I went with a flat top knuckle (thanks Todd!) with a spacer and high steering arm on the passenger side spindle. Notice the custom built steering rod. Thanks Heath!!! Page 12 Home