| Type/Model: | Enfield END-7Q |
|---|---|
| Tech: | Inner Sphere / 3058 |
| Config: | Biped BattleMech |
| Rules: | Level 2, Modified design |
| Mass: | 50 tons |
| Chassis: | Blackstone MD2E Endo Steel |
| Power Plant: | 250 Magna Fusion |
| Walking Speed: | 54.0 km/h |
| Maximum Speed: | 86.4 km/h |
| Jump Jets: | None |
| Jump Capacity: | 0 meters |
| Armor Type: | StarGuard III w. CASE Ferro-Fibrous |
.
| Type/Model: | Enfield END-7Q |
|---|---|
| Mass: | 50 tons |
| Equipment: | Crits | Mass | |
|---|---|---|---|
| Internal Structure: | 83 pts Endo Steel | 14 | 2.50 |
| (Endo Steel Loc: 1 HD, 2 LA, 2 RA, 2 LT, 2 RT, 1 CT, 2 LL, 2 RL) | |||
| Engine: | 250 | 6 | 12.50 |
| Walking MP: | 5 | ||
| Running MP: | 8 | ||
| Jumping MP: | 0 | ||
| Heat Sinks: | 10 Double [20] | 0 | .00 |
| Gyro: | 4 | 3.00 | |
| Cockpit, Life Support, Sensors: | 5 | 3.00 | |
| Actuators: | L: Sh+UA+LA, R: Sh+UA+LA | 14 | .00 |
| Armor Factor: | 152 pts Ferro-Fibrous | 14 | 8.50 |
| (Armor Crit Loc: 4 LA, 1 RA, 4 LT, 4 RT, 1 CT) | |||
| Internal | Armor | ||
|---|---|---|---|
| Structure | Value | ||
| Head: | 3 | 9 | |
| Center Torso: | 16 | 20 | |
| Center Torso (Rear): | 7 | ||
| L/R Side Torso: | 12 | 16/16 | |
| L/R Side Torso (Rear): | 6/6 | ||
| L/R Arm: | 8 | 14/14 | |
| L/R Leg: | 12 | 22/22 |
| Weapons & Equipment: | Loc | Heat | Ammo | Crits | Mass |
|---|---|---|---|---|---|
| 1 LB 10-X AC | RA | 2 | 20 | 8 | 13.00 |
| (Ammo Loc: 2 RT) | |||||
| 1 Large Laser | LA | 8 | 2 | 5.00 | |
| 1 Medium Laser | RT | 3 | 1 | 1.00 | |
| 1 Medium Laser | LT | 3 | 1 | 1.00 | |
| CASE Equipment: | RT | 1 | .50 | ||
| TOTALS: | 16 | 70 | 50.00 | ||
| Crits & Tons Left: | 8 | .00 | |||
| Calculated Factors: | |
|---|---|
| Total Cost: | 4,796,000 C-Bills |
| Battle Value: | 1,173 |
| Cost per BV: | 4,088.66 |
| Weapon Value: | 1,153 / 1,153 (Ratio = .98 / .98) |
| Damage Factors: | SRDmg = 23; MRDmg = 12; LRDmg = 3 |
| BattleForce2: | MP: 5, Armor/Structure: 4/4 |
| Damage PB/M/L: 4/3/1, Overheat: 0 | |
| Class: MM, Point Value: 12 |
Created with HeavyMetal Pro