| Type/Model: | Clint CLNT-2-3BC |
|---|---|
| Tech: | Inner Sphere / 3058 |
| Config: | Biped BattleMech |
| Rules: | Level 2, Modified design |
| Mass: | 40 tons |
| Chassis: | Endo Steel |
| Power Plant: | 240 Pitban Fusion |
| Walking Speed: | 64.8 km/h |
| Maximum Speed: | 97.2 km/h |
| Jump Jets: | 6 Standard Jump Jets |
| Jump Capacity: | 180 meters |
| Armor Type: | Ferro-Fibrous |
| Type/Model: | Clint CLNT-2-3BC |
|---|---|
| Mass: | 40 tons |
| Equipment: | Crits | Mass | |
|---|---|---|---|
| Internal Structure: | 67 pts Endo Steel | 14 | 2.00 |
| (Endo Steel Loc: 1 HD, 3 LA, 2 RA, 2 LT, 2 RT, 2 CT, 1 LL, 1 RL) | |||
| Engine: | 240 | 6 | 11.50 |
| Walking MP: | 6 | ||
| Running MP: | 9 | ||
| Jumping MP: | 6 | ||
| Heat Sinks: | 11 Double [22] | 6 | 1.00 |
| (Heat Sink Loc: 1 RA, 1 RT) | |||
| Gyro: | 4 | 3.00 | |
| Cockpit, Life Support, Sensors: | 5 | 3.00 | |
| Actuators: | L: Sh+UA+LA+H, R: Sh+UA+LA+H | 16 | .00 |
| Armor Factor: | 134 pts Ferro-Fibrous | 14 | 7.50 |
| (Armor Crit Loc: 5 LA, 5 LT, 4 RT) | |||
| Internal | Armor | ||
|---|---|---|---|
| Structure | Value | ||
| Head: | 3 | 9 | |
| Center Torso: | 12 | 16 | |
| Center Torso (Rear): | 5 | ||
| L/R Side Torso: | 10 | 15/15 | |
| L/R Side Torso (Rear): | 5/5 | ||
| L/R Arm: | 6 | 12/12 | |
| L/R Leg: | 10 | 20/20 |
| Weapons & Equipment: | Loc | Heat | Ammo | Crits | Mass |
|---|---|---|---|---|---|
| 1 ER PPC | RA | 15 | 3 | 7.00 | |
| 1 Medium Laser | RT | 3 | 1 | 1.00 | |
| 1 Medium Laser | LT | 3 | 1 | 1.00 | |
| 6 Standard Jump Jets: | 6 | 3.00 | |||
| (Jump Jet Loc: 2 LT, 2 RT, 1 LL, 1 RL) | |||||
| TOTALS: | 21 | 76 | 40.00 | ||
| Crits & Tons Left: | 2 | .00 | |||
| Calculated Factors: | |
|---|---|
| Total Cost: | 4,122,160 C-Bills |
| Battle Value: | 1,168 |
| Cost per BV: | 3,529.25 |
| Weapon Value: | 822 / 822 (Ratio = .70 / .70) |
| Damage Factors: | SRDmg = 17; MRDmg = 8; LRDmg = 4 |
| BattleForce2: | MP: 6J, Armor/Structure: 3/3 |
| Damage PB/M/L: 3/2/1, Overheat: 0 | |
| Class: MM, Point Value: 12 |
Created with HeavyMetal Pro
