MAKE SURE YOUR TRACTOR/TRUCK CONFORMS TO THESE SMOKE TUBE DIMENSIONS AND THAT THERE IS NO OBSTRUCTIONS!! (IE ROPS, ROLLCAGE TO PIPE HEIGHT, PIPE BRACE, ETC)
YOU MUST CONFROM TO THESE SMOKETUBE RULES OR YOU WILL NOT HOOK AND YOU WILL FORFEIT YOUR ENTRY
Examples:
ATTN TRACTORS: YOU MUST HAVE A MINIMUM OF 12" CLEARANCE BETWEEN TOP OF ROLL CAGE/ROPS TO THE BOTTOM OF THE SMOKETUBE. 17" IS PREFERRED
TRACTORS & TRUCKS: ALL BOLTS IN TOP OF SMOKETUBE BRACE BRACKETS MUST BE INSTALLED THREADED END DOWN AND AWAY FROM THE OUTER LINER OF THE SLED TUBE.
TRUCK SMOKE TUBE SPECS.
FRONT LIFT PLATES FOR ALL DIESEL OR ALCOHOL TRACTORS Plate must be steel material with a 3" dia. hole in the center built heavy enough and fastened in a way to support the weight of your vehicle. Plate must be mounted at the front most point of your vehicle and unobstructed by weights or anything else.
(SS/PS, SUPER FARM, PRO FARM, MOD TURBO/LIM PRO, LT LIM TURBO, ALL OPEN TRACTORS)
** MANDATORY TO HAVE THESE LIFT PLATES ON YOUR TRACTOR SO THE TRACK EQUIPMENT PERSONNEL CAN MANUEVER YOU AROUND THE PITS AND HOOKING YOU TO THE SLED AND TAKING YOU OFF THE TRACK AFTER YOU PULL **
(see example photo below)
THIS PLATE IS ON A 10,000LB PRO STOCK TRACTOR