|
DEDend's DSS Testing
Database |
|
Guides |
| Set up your loader |
 |
This is the device that will be used to program your HU cards! This device comes shipped from our warehouse with dip switches 2 and 5 set as well as HU flashed to the Atmel. This device is ready to program HU right away! |
 |
The first step before you program is to plug the 9-pin serial cable into the back of your computer. If you have 9-pin slots you will need to test one and may possibly have to use the other. |
 |
Plug the male end of the 9-pin serial cable into the back of the programmer. |
 |
Connect the power supply to the programmer. Ensure that the dip switches are set to 2 and 5 on. If this is the case you are ready to program HU! |
OR
