Site hosted by Angelfire.com: Build your free website today!

Ok Netbios Hacking Via Windows...

Firstly i Take no responsibility for u use of this text it is for educational persons Only.. Now we have that shit out of the way lets start. *Note i am Writing this text 4 newbies if you are a l33t hacker then dont bother reading this because u should all ready know it.. OK we are going to exploit Netbios port 139 (Windows Shares) this was my very first hack and is very affective..i still use it from time to time..

How To enable Netbios Over TCP/IP In WinXP:

Goto your dial-up properties then the networking tab then tcp/ip properties then advanced then the WINS tab and selext Enable Netbios Over Tcp/Ip.*Note you must have File and printer sharing and Client for Microsoft Networks ticked in Networking under your dial-up properties...

useing Netbios TO hack..

Ok Now we have the Installing out of the way time to Start Playing. Load up ms-dos you will find this under start All programs Command prompt. then minimise that 4 now i suggest u download Mirc u can get it under IRC on the main page. Once you Find a ip address then open up your command prompt and typ nbtstat -A (ip address) If you find a ip that can be hack then it should look like this:

C:\Documents and Settings\maddo>nbtstat -A

144.139.79.168

telstra:

Node IpAddress: [144.139.79.168] Scope Id: []

NetBIOS Remote Machine Name Table

Name Type Status

---------------------------------------------

TIMMY <00> UNIQUE Registered

TIMMY <20> UNIQUE Registered

WORKGROUP <00> GROUP Registered

WORKGROUP <1E> GROUP Registered

MAC Address = 00-53-45-00-00-00

Well some this like that any way.. See TIMMY <20> UNIQUE Registered that tells us that this Host is open To test it out. goto dos and type ping maddo.no-ip.org and use that ip adddress. I have opened mine up so u can test it out but u will not be able to hack me because i know what i am doing.. After you get a host with <20> then type Net view \\ip address this should display a list of shares if the host is not protected. you can do this to my ip now if you like. after you see a share that you would like to hack type Net use X: \\ipaddress\share name hit enter if all goes well just type x: and your IN HAPPY HACKING.. If you have some question to ask in regards to this Tutorial then e-mail me at cheesell@yahoo.com. *recap of commands Nbtstat -A ipaddress :see if shares are open Net view \\ip address :view what shares are avalible on your host Net use x: \\ipaddress\share name :maps a network path to a local disk ping : ping a host with a set number of packets. sorry if the spelling sux and stuff but this was a bit rushed..THX .CyBeRmAgSa.