Chapter 7

Question 1:
What option is used with the Ping command to send specified sized echo packets?

A.   -n

B.   -l

C.   -r

D.   -s

Question 2:
You are responsible for determining the cost of a new network installation. Which factor(s) should you consider in determining theinitial installation cost?

A.   Equipment failure rates

B.   Design and implementation

C.   Equipment upgrading

D.   Equipment monitoring

Question 3:
What is the best way to describe a network?

A.   A series of individual components that communicate

B.   A single unit that represents all components

C.   A single client and multiple servers

D.   All communication components and the Internet

Question 4:
What SNMP component is used to store port, interface, TCP, and ICMP data?

A.   Management station

B.   Management agent

C.   Management information base

D.   Management server

Question 5:
What type of tool is used to detect unexpected changes, predict growth needs, and monitor hacker attacks against the network?

A.   ACL

B.   Firewall

C.   PIX

D.   Network monitor

Question 6:
What protocol provides RMON extensions?

A.   SNMP

B.   UDP

C.   IPX

D.   SMTP

Question 7:
You have identified a faulty device in your network. You have decided to replace each cable and modules independently. What troubleshooting technique was demonstrated?

A.   Process of Elimination

B.   Grouping

C.   Divide and Conquer

D.   Multilevel Analysis

Question 8:
What command is used to display the hardware addresses in the arp cache?

A.   tracert

B.   arp -a

C.   rarp -a

D.   arp -s

Question 9:
What is typicallyNOT included in the documentation and use of an error report?

A.   Location of problem

B.   Details of network configurations and cabling layouts

C.   A method of tracking the progress and eventual solution of problems

D.   Solutions to new problems

Question 10:
What command is used to display protocol statistics?

A.   Tracert

B.   Telnet

C.   Ping

D.   Netstat

Question 11:
What are the two types of destination addresses used with the Telnet command to establish a connection with a remote system?

A.   IP and host name

B.   MAC and IP

C.   Host name and MAC

D.   MAC and IPX

Question 12:
What are examples of network traffic monitoring programs?

A.   Neo Trace

B.   Configmaker

C.   Fluke Network Analyzer

D.   CiscoPro RSL

Question 13:
What command is used to check a physical connection between two hosts?

A.   TPING

B.   WINPING

C.   TCPING

D.   PING

Question 14:
Which of the following single router changes should NOT adversely affect network operations?

A.   Creating a router banner

B.   Changing the DNS server's address

C.   Changing subnet mask length

D.   Changing the routed protocols in use

Question 15:
When a successful ping occurs from a workstation after typing "ping 127.0.0.1", what network device is eliminated as a potential problem?

A.   Patch cable

B.   DNS server

C.   Default gateway

D.   The workstation

Question 16:
What SNMP component is used to extract MIBs from client devices and maintain a management database?

A.   Management station

B.   Management agent

C.   Management information base

D.   Network management protocol

Question 17:
What command should be used in a Windows 95 workstation to display the IP address and adapter address?

A.   tracert

B.   netstat

C.   winipcfg

D.   ping

Question 18:
Users in HR have called to complain that they cannot access a production server in Accounting. Users in HR can reach their own server. What utility should be used to determine which route the HR users' station is using?

A.   Telnet

B.   Tracert

C.   Ping

D.   Netstat

Question 19:
If the initial solution does not solve the problem, what should be the next step according to the problem solving method?

A.   Document problem solution

B.   Propose possible solution

C.   Identify network or user problem

D.   Gather and modify data

Question 20:
What does remote monitoring use to gather data?

A.   SNMP agent

B.   RMON probe

C.   SNTP server

D.   MIB

Question 21:
What command is used to establish a remote login to a router?

A.   rsession

B.   rlogin

C.   telnet

D.   rconsole

Question 22:
You have a large network that you would like to remotely monitor all of your distribution layer routers. You are currently running a network management application called Cisco Works on an Windows NT workstation. What must be loaded on each router?

A.   Management Information Base

B.   SNMP monitoring tables

C.   SNMP Agent

D.   RMON client

Question 23:
Which protocol works with Network Traffic Monitoring software to gather information for monitoring analysis?

A.   RIP

B.   IGRP

C.   SNMP

D.   IPX/SPX