RE: [PROTEL EDA USERS]: Default Designators

["Tony Karavidas" <tony@encoreelectronics.com>]

It's checked. and it doesn't work. I like the font to be sans serif. If I
place a component from a library, it works fine. If I "update PCB" from the
schematic, it puts down components with "default" font.

Tony


> -----Original Message-----
> From: TSListServer [mailto:owner-proteledausers@techservinc.com]On
> Behalf Of Brad Velander
> Sent: Monday, September 18, 2000 8:19 AM
> To: Multiple recipients of list proteledausers
> Subject: RE: [PROTEL EDA USERS]: Default Designators
>
>
> Tony & Steve,
> 	just tried it on my install of P99SE SP5 and it works fine. My best
> guess is that you may not have the "permanent" checkbox checked, therefore
> the change was not saved for future component insertions? I don't
> know what
> it could be other then that.
>
> Sincerely,
>
> Brad Velander
> PCB Design Technologist
> Norsat International Inc.
> #100 - 4401 Still Creek Dr.,
> Burnaby, B.C., Canada.
> V5C6G9.
> voice: (604) 292-9089 (direct line)
> fax:    (604) 292-9010
> email: bvelander@norsat.com
> www: www.norsat.com
>
>
> > -----Original Message-----
> > From: TSListServer [mailto:owner-proteledausers@techservinc.com]On
> > Behalf Of Tony Karavidas
> > Sent: Friday, September 15, 2000 10:04 PM
> > To: Multiple recipients of list proteledausers
> > Subject: RE: [PROTEL EDA USERS]: Default Designators
> >
> >
> > Seems like a bug. I just tried it and it doesn't work for me either.
> >
> >
> >
> > > -----Original Message-----
> > > From: TSListServer [mailto:owner-proteledausers@techservinc.com]On
> > > Behalf Of HxEngr@aol.com
> > > Sent: Friday, September 15, 2000 7:25 PM
> > > To: Multiple recipients of list proteledausers
> > > Subject: [PROTEL EDA USERS]: Default Designators
> > >
> > >
> > > I have tried to set the default size of designators in PCB (99SE
> > > sp5), but
> > > any time I import new components from a netlist it always uses
> > > the factory
> > > default of 60 mils height, 10 mils width for all new ref
> > > designators. Am I
> > > missing something or is this just a bug in the package?
> > >
> > > Steve Hendrix
>
>
>
>