Site hosted by Angelfire.com: Build your free website today!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PROTEL EDA USERS]: Drill Drawing symbol reference chart

To: Multiple recipients of list proteledausers <proteledausers@techservinc.com>
Subject: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
From: "D. Chris Mackensen" <dcm@blueskydevice.com>
Date: Wed, 13 Sep 2000 12:38:26 -0400
Importance: Normal
In-Reply-To: <001301c01d28$c135cdc0$ae34fea9@sara>
Reply-To: proteledausers@techservinc.com
Sender: "TSListServer" <owner-proteledausers@techservinc.com>

didn't there used to exist a way of making a chart on the drill drawing that
listed the different symbols used, referenced to the hole size, plated
through status etc.????

I can't seem to find it in P99SE....

Thanks,
-chris

Follow-Ups:
- RE: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  - From: "Tony Karavidas" <tony@encoreelectronics.com>
- Re: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  - From: Abd ul-Rahman Lomax <marjan@vom.com>
- Re: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  - From: "Geoff Harland" <gharland@ingenico.com.au>

References:
- Re: [PROTEL EDA USERS]: Protel / Specctra problems
  - From: "Michael Reagan" <edsi@netstorm.net>

Prev by Date: RE: [PROTEL EDA USERS]: Print/Preview crash system
Next by Date: RE: [PROTEL EDA USERS] Can't re-install???
Prev by thread: Re: [PROTEL EDA USERS]: Protel / Specctra problems
Next by thread: RE: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
Index(es):
- Date
- Thread