Fifth oscilloscope screen shot. This is somewhat similar to screen 3 but trace 1 is totally contained within trace 2. Trace 1 is from the same source as the fourth screen but the vertical range setting is 50 mV per division instead of 39.8 mv per division. The peak is 3 divisions high instead of being at the top of the screen. The channel 2 range is set to 200 mV per division. The channel 2 display has the same shape as that on channel 1 but is a bit larger. The ends are almost twice as wide as for trace 1 but the peak at the middle only comes up to 3.6 divisions. For those who can see a little or could see at some time earlier in their lives, the display is quite colorful. Trace 1 is yellow and trace 2 is given that fancy name magenta. I've always called it purple. Numeric displays at the bottom of the screen give the peak to peak voltage on channel 1 as 318 mV and trace 2 as 1.46 V. These readouts take range settings into account so what you see is what you get. The insertion loss is quite high. End of verbal description.
Go back.