This is my Zalman CNPS-5000 with a Japanese, Handcrafted, 92mm to 60mm adaptor with a 92mm Panaflo High Output Fan!
This is a clear 80mm fan that I pulled out of my old PSU. I wanted it here for looks. Also, observe the way I mount my fans. This eliminates rattling and reduces vibration noises.
This is the front of my computer. I have two drive bay coolers with 3 fans each. They're small but they do make the difference. I broke off the grill and took off the air filter for better air flow. Theres a Pioneer Slot loading DVD drive, an Iomega 8x4x32x buner, an Iomega ZIP 100, and an Imation Super Disk Drive.
The bottom front panel can be removed incase of extreme overheating.
This is the case handle. You'll notice that it is mounted slightly off centered. I did this to compensate for the unequal distribution of weight from the devices in my computer.
I have a clear side panel which came stock as the case, silver Japanese rounded cables, and a bunch of PCI cards.
This strobe light was hell to put in. I had to take apart the PSU, and wire it in. I rewired the switch on the back of the PSU to turn the strobe on and off and put the adjuster knob to where the voltage switch was.
This is a blacklight meant for a car. Since it uses a 12 volt input, I just wired it into the 12 volt bridge of the PSU.
This is my own personal bedroom home theater. I can play Playstation, watch a DVD, and use the computer all in one. I have my audio hooked up to a Denon Pro Logic reciever which powers the two Sonys (Center Channel), the two Pioneers (Left and Right Channels), and two rear speaker.