Lewis Boat Works: Custom Boat building and Plans
SimpleSimon
A Quick and Dirty Sailboat/Rowboat
A lot done
Here is the bottom completed. Butt block is glued and screwed.
This is how the frame went together. Notice the larger cut out for the chine log. This is a limber hole so the boat can be totally drained.
Got the front and rear decks cut out too. Here is also a nice view of how the frame is installed . There will be another one further back if it needs it. The bulkheads in front will serve better than frames in the front.
All in all, the boat is shaping up nicely. Pardon the spots on the lense, sanding dust.
