A Better Way To Configure IdentD With A Linksys Home Router 1. Start IE and go to your routers webpage (192.168.1.1) 2. login then click on "advanced" tab, then "forwarding" tab 3. If there are any service port ranges that include port 113, delete them by typing 0 in all boxes if you made changes, click apply, you may disconnect 4. click on "Port Triggering" button (If it's missing you need to upgrade your router's firmware) 5. Enter the following Info: Application Name: IdentD Trigger Port Range 6667-6670 Icoming Port Range: 113-113 Click apply 6. Next configure MIRC, file options, connect, identd, check all boxes except "Enable only when connecting". (leave other fields at default). 7. Close Mirc and reconnect. You're done