| Previous | Toc | Next |
SpeCial instructions for Cab Over Engine Models
|
Figure 101 |
1, Follow same instructions as outlined for |
|
regular truck, except the hose lengths and |
|
|
13. Replace engine thermostat with high temper |
hose clamp_ Drill 1/4 inch hole through |
|
ature thermostat furnished. Permanent anti |
dash as shown in section FF, figure 103. |
|
freeze must be used. |
2. Attach hose as shown in figure 103. |
Approximate Flat Rate Time 1.7 Hours.
Approximate Flat Rate Time 1,7 hours.
| Previous | Toc | Next |
