Coded by [KoG]^diablo.

Contact info : 
	email : diablo@thekog.com
	irc   : [KoG]^diablo on ETG; channel #kog
	irc   : Dia19 on EFnet; channel #poptart.net

----------------------------------------------------------------------------------------
YOUR NEED AT LEAST mIRC VERSION 5.9 OR GREATER. HAVEN'T TESTED WITH ANY OLDER VERSIONS!! 


This script is to be used with a mIRC based program.

To load the script, extract the contents of this zip into the location of where 
your mirc32.exe is located. 

Once thats done, in irc there are two ways to load it.

1: Type /load -rs sysinfo.mrc

2: Press the button up top where it has 2 red dots and the CE letters. Then goto
   File --> Load --> Script , browse to the directoy you extracted the contents to.
   Highlight the file sysinfo.mrc and press the open button. 
   Then goto File --> Save and Exit.


At this point it will load the dialog and u can do this:

1: "Enter Video Card"  -- Enter the name of your current video card.

To change this information above simply right click --> System Information -> and click Configure.

To execute the script do the following:

right click -> System Information -> then hit the command. 

or

/sysinfo    (will execute your system information, ram, cpu, video card, uptime, etc)

/space      (will execute the amount of space you have currently on your hard drive)

/network  	(will execute network information)

/temperature (will show system tempertaures, must have MotherBoard Monitor 5.05 installed and config correctly, http://mbm.livewiredev.com/)

/speed 	(will show the bandwidth currently going through your computer, takes 5-6 seconds to execute, sorry)

/power (will display the channels you are opped in and how many people total are in those chans)

/ip (will display your current ip)

----------------------------------------------------------------------------------------


History
 2.20 -		Added a date for network total tansfers.
 2.19 - 	Just added an option to turn the Auto Reminder On/Off
 2.18 - 	Changed space command to see the size of the disks now instead of just free space.
 2.17 -   	Changed the totals of In/Out in the Network transfers to gigabytes since megabytes
		became to large for some users.
 2.16 -   	Added DCC commands, shows gets, sends, record speeds, total amount sent over DCC.

 2.15 -         Fixxed the /network totals, should calculate correctly now. Added so you
                can reset both the record speeds and network total traffic. Also added the
                KOG-Fu Logo.

 2.14 - 
		Fixxed space for more then 6 hard drives allowed. Now up to 40. 
        	Commented out total network space due to errors that cannot be fixxed.
		Added record speeds for the /speed command.

 1.x-3.13 - 
		Lack of history. 
