DIN connector sockets are always male; whereas mini-DIN connector sockets are always female?
False 
Before sending data, a modem sends a request to send signal, or RTS.
true
If a computer's bios allows it, you can boot from a CD-Rom.
true
SCSI adapters usually don't need drivers, just the devices that interface with them.
false
Most SCSI-2 devices will work fine with SCSI-1 adapters.
true
In addition to i/o port addresses, SCSI adapters also use a range of rom addresses for their onboard bios.
true
A virus can mimick just about any hardware symptoms you can think of.
true
When your hard drive crashes from any of the correct selections in the question above, or from dropping it, it is known as head-to-disk interference, or HDI.
true
You can have EISA and MCA devices in the same PC.
false
You can place an ISA device in an EISA slot.
true
You can place an EISA device in an ISA slot.
false
You can only place an MCA device in an MCA slot.
a. true
Himem.sys must be loaded before loading emm386.exe.
true
You can run Windows 3.1 or 3.11 without loading himem.sys.
false
You must have himem.sys loaded before you can load DOS high.
true
In addition to managing expanded memory, emm386.exe also manages the upper memory blocks.
true
If SMARTDRV is not loaded you may reduce the number of allocated buffers in the "BUFFERS=" statement.
false
Cooperative multi-tasking means that after a certain peiod of time, Windows takes control of the CPU from one application to give it to the next one waiting to run.
false
The Windows swap file can exist on a compressed volume.
true
Changing the order in which you load device drivers in config.sys can sometimes optimize memory by freeing up a larger block of the upper memory area.
true
