| ELMAT Automatic Injection Moulding Machine | |
|
|
|
| Dia of Screw | mm | 30 | 35 | 40 |
| Stroke of Screw | mm | 160 | ||
| Rate of Injection | G/sec. | 71 | 96 | 125 |
| Recovery Rate | G/Sec. | 17 | 24 | 31 |
| Stroke Volume of Screw | cm3 | 113 | 154 | 201 |
| Max weight of Injection | Gms. | 103 | 140 | 183 |
| Specific Injection Pressure | Kg/cm2 | 1930 | 1400 | 1075 |
| Stroke of Nozzel | mm | 300 | ||
| Nozzel Contact Pressure | MT | 4 | ||
| Heating Capacity | kw | 5.7 | ||
| Screw Speed | rpm | 10-250 | ||
| Locking force | MT | 75 | ||
| Stroke | mm | 300 | ||
| Mould platen total size h x v | mm | 500 X 500 | ||
| Distance between tie bars h x v | mm | 330 X 330 | ||
| Height of Mould Max. | mm | 350 | ||
| Height of Mould Min. | mm | 150 | ||
| Max. Day Light | mm | 650 | ||
| Diameter of Tie Bars | mm | 60 | ||
| Dry Cycle Performance | Sec. | 1.5 | ||
| Motor for Pump drive | Kw | 11 | ||
| Oil filing | Litr. | 300 | ||
|
© Copyrigth ELMAT |
|
|
