| ELMAT ELH Series Injection Moulding Machine | ||||
|
Model ELH-150 (150-500) |
||||
| INJECTION UNIT | ||||
| Dia of Screw | mm | 45 | 50 | 55 |
| Stroke of Screw | mm | 210 | ||
| Rate of Injection | G/sec. | 201 | 248 | 300 |
| Recovery Rate | G/Sec. | 28 | 31 | 37 |
| Stroke Volume of Screw | cm3 | 334 | 412 | 499 |
| Max weight of Injection | Gms. | 302 | 372 | 451 |
| Specific Injection Pressure | Kg/cm2 | 1898 | 1538 | 1270 |
| Stroke of Nozzel | mm | 300 | ||
| Nozzel Contact Pressure | MT | 6.2 | ||
| Heating Capacity | kw | 11 | ||
| Screw Speed | rpm | 50-200 | ||
| LOCKING UNIT | ||||
| Locking force | MT | 150 | ||
| Stroke | mm | 450 | ||
| Mould platen total size h x v | mm | 680 x 690 | ||
| Distance between tie bars h x v | mm | 450 x 450 | ||
| Height of Mould Max. | mm | 500 | ||
| Height of Mould Min. | mm | 200 | ||
| Max. Day Light | mm | 950 | ||
| Diameter of Tie Bars | mm | 70 | ||
| Dry Cycle Performance | Sec. | 2 | ||
| DRIVE | ||||
| Motor for Pump drive | Kw | 18.75 | ||
| Oil filing | Litr. | 400 | ||
|
© Copyrigth ELMAT |
||||
|
|
||||
