| ELMAT ELH Series Injection Moulding Machine | ||||
|
Model ELH-125 (125-300) |
||||
| INJECTION UNIT | ||||
| Dia of Screw | mm | 40 | 45 | 50 |
| Stroke of Screw | mm | 190 | ||
| Rate of Injection | G/sec. | 120 | 153 | 188 |
| Recovery Rate | G/Sec. | 20 | 24 | 27 |
| Stroke Volume of Screw | cm3 | 226 | 286 | 353 |
| Max weight of Injection | Gms. | 215 | 272 | 336 |
| Specific Injection Pressure | Kg/cm2 | 1900 | 1500 | 1215 |
| Stroke of Nozzel | mm | 300 | ||
| Nozzel Contact Pressure | MT | 5.7 | ||
| Heating Capacity | kw | 8.8 | ||
| Screw Speed | rpm | 10-250 | ||
| LOCKING UNIT | ||||
| Locking force | MT | 125 | ||
| Stroke | mm | 400 | ||
| Mould platen total size h x v | mm | 630 x 630 | ||
| Distance between tie bars h x v | mm | 400 x 400 | ||
| Height of Mould Max. | mm | 450 | ||
| Height of Mould Min. | mm | 200 | ||
| Max. Day Light | mm | 850 | ||
| Diameter of Tie Bars | mm | 80 | ||
| Dry Cycle Performance | Sec. | 2 | ||
| DRIVE | ||||
| Motor for Pump drive | Kw | 15 | ||
| Oil filing | Litr. | 350 | ||
|
© Copyrigth ELMAT |
||||
|
|
||||
