| ELMAT ELH Series Injection Moulding Machine | ||||
|
Model ELH-100 (100-250) |
||||
| INJECTION UNIT | ||||
| Dia of Screw | mm | 35 | 40 | 45 |
| Stroke of Screw | mm | 160 | ||
| Rate of Injection | G/sec. | 86 | 112 | 142 |
| Recovery Rate | G/Sec. | 24 | 30 | 35 |
| Stroke Volume of Screw | cm3 | 154 | 201 | 230 |
| Max weight of Injection | Gms. | 140 | 183 | 230 |
| Specific Injection Pressure | Kg/cm2 | 1958 | 1500 | 1185 |
| Stroke of Nozzel | mm | 300 | ||
| Nozzel Contact Pressure | MT | 5.5 | ||
| Heating Capacity | kw | 6.7 | ||
| Screw Speed | rpm | 25-230 | ||
| LOCKING UNIT | ||||
| Locking force | MT | 100 | ||
| Stroke | mm | 350 | ||
| Mould platen total size h x v | mm | 540 x 540 | ||
| Distance between tie bars h x v | mm | 350 x 350 | ||
| Height of Mould Max. | mm | 400 | ||
| Height of Mould Min. | mm | 200 | ||
| Max. Day Light | mm | 750 | ||
| Diameter of Tie Bars | mm | 70 | ||
| Dry Cycle Performance | Sec. | 1.5 | ||
| DRIVE | ||||
| Motor for Pump drive | Kw | 15 | ||
| Oil filing | Litr. | 300 | ||
|
© Copyrigth ELMAT |
||||
|
|
||||
