Bead Oil Lamp Instructions
Bead Oil Lamp Instructions



Uses Standard Lamp Oil * Cotton Wick Doesn’t Burn * No Candle Wax Mess * A half cup of oil can last up to 8 hours * Attractive as well as Functional * Always ready to light *



Each uniquely handcrafted bead lamp draws oil from its base to the flame through the wick. The lamps are made from stoneware clay and high fired to 2300̊ F. Instructions Fill the lamp ½ full with oil. We recommend a paraffin wax lamp oil. Pull the wick down so that it is flush with the top edge of the bead. Exposure of more wick may result in a smoking flame. Replace the bead, so that the wick hangs down into the oil. Allow a few minutes for the oil to saturate the wick. Light the wick, adjusting the wick up or down so that the top of the flame burns cleanly. Please be careful, the bead gets very hot. Willey Pottery 19490 N 1560th St. Effingham, IL 62401 217-844-3610 rwilley@effingham.net As with any oil or wax candles, a flame is present, and must be used carefully and at your own risk. Please keep away from children and flammable material.