This is a very useful ramp and it is also very easy to build
Step 1
You sould do 4 frames like this one. 2 of the frames are for the long of the table and the oter 2 are for the with of it, so one pair must be much longer than the other, but remember that the height is the same for all four. It uses 5x5cm wood. Do as it is indicated in the image, to join the wood u may need to use very lond nails and for it to be stronger u may want to use "Liquid nails" glue.
Step 2
Now that u have the frames together making the structure of the table u need to put some ribs (do not leave more than 10 cm between each rib). Do as shone in the image. U can also put thick plywood.
Step 3
Get a 3/4" or more plywood and screw it to each of the ribs.
Step 4
Insert an iron angle for slides. The angle should be screwed.
Step 5
At last put Masonite (same thick that the iron angle (about 3/4")) over the plywood. U must screw it over the plywood and to a rib.
Final
When u are finished your table should look like this.
