Site hosted by Angelfire.com: Build your free website today!
Jet Tech Custom Fuel Cells

Jet Tech LLC

Gary Mueller
(715) 272-1917
jettechusa@frontiernet.net


Click here for jettechusa.com






Here is a selection of the tanks that Jet Tech LLC produces and their sizes.


Click on small pictures to order online


These tanks are designed to fit into the ULTRA FLASH Shorter wing bolts are used with these tanks. The combined capacity of the 2 tanks is 58 oz. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price for the pair is $210 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





These tanks are designed to fit into the BOOMERANG XL with no modifications. The combination consists of a 54 oz smoke tank and a 127 oz fuel tank. The smoke tank Measures 6" long, 3.5" tall and 4.5" wide. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment and the 90 elbow on the smoke tank supply for ease of installation. The price for the pair is $220 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed for smoke by Tim Sailor to fit in front of the fuel tank in the BOOMERANG XL with no modifications. The smoke tank has a capacity of 54 oz and can be used for smoke or fuel. The tank Measures 6" long, 3.5" tall and 4.5" wide. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment and the 90 elbow on the smoke supply line for ease of installation. The price is $100 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed to fit into the Boomerang XL with no modifications. It carries 127 oz. Measures 5 1/2" diameter and 9 3/8" long. The price is $140 plus shipping and includes the Jet Tech "O" Ring style fuel fittings. Click on the tank picture to order online





This tank is designed to fit into the FALCON 120 with a minor modification. The radio antena tube needs to be removed to allow a wider space to get sufficient fuel storage. It carries 90 oz. Measures 12" long, 4" tall and 4" wide at the front and 3" wide at the rear. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $135 plus shipping and comes assembled and pressure tested. Soon to be available for $175 as a partitioned Smoke and Fuel Tank combination with 60oz fuel and 30oz of smoke oil. Click on the tank picture to order online





This 3 tank set designed by Joe Grice is designed to fit into the MIBO G4 A-10 with no modifications. They carry a combined capacity of over 300 oz. which is needed for intermediate to large turbines for this aircraft. High capacity vents and high flow JMP fuel supply fittings are used to fit 6mm fuel lines. The top tank with it's 2 fuel pickups feeds the lower 2 tanks, each supplying it's own turbine.Shown here with JET Model Products fuel fittings as standard equipment. The price is $425 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed to fit into the BOOMERANG NANO with no modifications. It carries 79 oz. Measures 8 1/4" long, 5" tall and 4 5/8" wide. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $140 plus shipping and comes assembled and pressure tested. Soon to be available as a partitioned Smoke and Fuel Tank combination. Click on the tank picture to order online





These tanks are designed to fit into the wing root area of the KINGCAT KNOCK-OFF KIT with no modifications. They carry 48 oz for the pair. Measures 8 3/4" long, 3" tall and 2 1/4" wide. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $220 for the pair plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed to fit into the TROYBUILT SHOCK JET with no modifications. It carries 92 oz. Measures 10" long, 4 7/8" tall and 3 1/2" wide. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $140 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed to fit into the TROYBUILT DV8R with no modifications. It carries 116 oz. Measures 10" long, 3 1/2" tall and 6" wide. Shown here with the old style fuel fitting, the tank now comes with the new Jet Tech "O" Ring style fuel fitting as standard equipment. The price is $140 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed to fit into the AVIATION DESIGN SCORPION JET and VELOX with no modifications. It carries 4 Liters of fuel or as shown here with 3 Liters of fuel and 1 Liter of Smoke Oil. Measures 13" long, 6" tall and 4" wide, shaped as an oval with parallel flat sides. The tank comes with the new Jet Tech "O" Ring style fuel fitting as standard equipment. This tank can be made shorter or longer to fit your requirement. The price is $200 plus shipping with the smoke partition or $145 plus shipping without the smoke partiton and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed by Paul Jacques to fit into the BOOMERANG TAURUS, ELAN AND SPRINT with no modifications. It carries 125 oz. Measures 9 3/4" long, 6 3/4" tall and 4 3/4" wide. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $140 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank called the Elan+Smoke It is designed by Paul Jacques to fit into the BOOMERANG TAURUS, ELAN AND SPRINT with no modifications. The tank carries a capacity of 125 oz. divided into 35 oz of Smoke oil and 90 oz of Fuel. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $175 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank called the Intro-ER (Extended Range) is designed by Paul Jacques to fit into the BOOMERANG INTRO with no modifications. The tank carries a capacity of 88 oz. (13 oz more than the standard Intro Tank). Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $140 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank called the Intro ER +Smoke is designed by Paul Jacques to fit into the BOOMERANG INTRO with no modifications. The tank carries a capacity of 88 oz. divided into 21 oz of Smoke oil and 67 oz of Fuel, or other combinations may be special ordered. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $175 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed to fit into the COMPOSITE ARF PYTHON with no modifications. The tank carries a capacity of 80 oz. It measures 8 1/2" long 3 1/2" tall and 4 7/8" wide. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $140 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





These tanks are designed by Frank Tiano to fit into the TRIM F-86 with no modifications. The 4 tanks carry a combined capacity of 60 oz. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $300 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





This tank is designed to fit into the Boomerang INTRO with no modifications. It carries 75 oz. Designed by Dave Rigotti. It measures 3 1/2" high, 4 7/8" wide and 8" long. The price is $140 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online





This tank is designed to fit into the Reaction 54 with no modifications. It carries 72 oz. Designed by Dave Rigotti, it measures 4 5/8" wide, 3 3/4" high and 8 1/4" long. The price is $140 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings.. Click on the tank picture to order online





These tanks are designed to be direct replacements to fit into the FLASH with no modifications to the airframe. However if you had mounted the original tank supplied with the kit, you will have to replace your original mounting blocks to fit the new fuselage Jet Tech tank. The price is $220 for the pair plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online





This tank is designed by Scott Rais to fit into the J.H.H. Hawk ducted fan jet to be used when converting to a turbine powered jet. Capacity is 55 oz. Measures 5.75" long x 4.125" tall x 7" wide. The tank comes assembled and pressure tested with the Jet Tech "O" Ring style Fuel Fittings. Cost is $140 plus shipping. Click on the tank picture to order online




These tanks designed and fit originally by Paul Jacques and modified by Tam to conform to the interior space of the YA F-15 for maximum fuel capacity. The Tanks rest above the main landing gear along side the turbine on each side. The fuel is very near to the CG. These tanks carry a combined 120oz for the pair. (9.5" long, 5.5" wide and 2.75" tall). The price is $220 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online





This tank is designed for additional fuel or smoke to fit on the belly center line of smaller jets that do not have sufficient internal space for fuel. It was originally designed as a functional scale tank for the BVM F-16 . The tank has a capacity of 84 oz and can be used for smoke or fuel. The tank Measures 22.25" long, 2.25" tall and 4" wide. Shown here with JET TECH "O"Ring style fuel fittings as standard equipment. The price is $245 plus shipping and comes assembled and pressure tested. Click on the tank picture to order online





These tanks designed and fit by Paul Jacques are designed to conform to the interior space of the Avond's F-15 for maximum fuel capacity. The Tanks rest above the main landing gear along side the turbine on each side. The fuel is very near to the CG. These tanks carry a combined 160oz for the pair. (14.75" long, 5.5" wide and 2.75" tall).The tanks may be made shorter to reduce your fuel load for smaller turbine installations. The price is $220 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online






These tanks designed and fit by Bob Price are designed to conform to the interior space of the new Yellow Aircraft Stingray for maximum fuel capacity. The Stingray offers very little space for electronics and fuel, so careful design was needed to enable a practical fuel load. These tanks carry a combined 83oz for the pair. (7.125' long, 4.0" wide and 3.375" tall).The price is $200 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online






These tanks were designed to fit into the Maverick line of ducted fan jets to be used when converting to a turbine powered jet. The tanks fit in conjunction with the modified inlet ducts that reduce the air flow and inlet diameter to be compatable with turbines. Jet Tech has a complete conversion package available for the Maverick class of jets. The tanks hold 60 oz and come assembled and pressure tested with BVM "O" ring fuel fittings. Cost is $220 plus shipping. Click on the tank picture to order online






This tank is designed to be a Kevlar header tank used immediately before the turbine pump. Why have a complete Kevlar system and not have a Kevlar header? This tank carries 22oz (5.875" long, 3.5" wide and 2" tall).The price is $110 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




This Kevlar tank is designed to be used as a primary tank or header tank immediately before the turbine pump. This tank carries 34oz (6' long, 3.5" wide and 3" tall. The price is $110 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




This Kevlar tank is designed to be used as a primary tank it carries 93oz (8' long, 3.5" wide and 6" tall. The price is $140 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




These tanks are designed to be used in the Yellow Aircraft Single Size F-18 converted to turbine power. These tanks carry a combined total of 80oz. (5"long, 3.5" wide and 3" tall).The price is $215 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




These tanks are designed by Tam from Tam Jets to be used in the DL Areomodels 339 Jet Kit. These tanks carry a combined total of 60oz. (3.75"long, 3.5" wide and 5.875" tall).The price is $195 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




These tanks are designed to be used in the Yellow Aircraft and BVM F-16 Jet Kits when converting to turbine power. These tanks carry a combined total of 78oz. They have also been used in the Spyder Jets F-16 with some modification to the inlet ducting and one former. (9.5"long, 3.5" wide and 4" tall).The price is $220 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




These tanks are designed to be used in the F-8 Crusader converted to turbine power. These tanks carry a combined total of 98oz. (9"long, 2.5" wide and 4." tall).The price is $220 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




This tank is designed by Tam from Tam Jets to be used in the Fiberclassics Composite Kangaroo and the Aviation Design Rafale . This tank is a direct replacement for the JPX propane tanks when converting to a Jet A turbine. The tank carries a total of 70oz when configured for the Kangaroo and 75oz when configured for the Rafale or JPX version. (14"long, 3.5" diameter).The price is $140 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




This tank is designed by Bob Price to be used in the Fiberclassics Composite Kangaroo . This is also the primary tank for the NEW Mach 2.2 92" long F-20 . The tank carries a total of 105oz (9.5"long, 5" tall and 7" wide).The price is $140 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




These tanks are designed to be used in the JMP T-33 when used with an open turbine installation. Designed and used by Bob Price these tanks carry a total of 128 0z of fuel . The 2 primary tanks carry 52 oz each plus the header tank of 24oz (4"long, 6" wide and 6.5" tall).The price is $280 for the set of 3 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




This set of tanks is designed for use in the Eurosport Jet kit. The set consists of 2 saddle tanks carrying 80 oz each (7.6" long, 3" wide and 7" tall). The cost for the 2 tanks is $240 plus shipping for tanks with the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




These tanks are designed by Eric Rantet to be used in the Aviation Design SU-27/35 kit. The tanks carry a total of 140oz (11.75"long, 4.25" tall and 4.25" wide).These tanks are available only through Aviation Design.




This tank is designed by Bob Wilcox at Jet Cat USA to be used in a special project that was powered by a P-160. The tank capacity is 2.5 Gallons. Three of these tanks were produced.




These tanks designed specifically for the Yellow Aircraft Starfire by John Albury from Fort Worth Texas consists of two saddle tanks carrying 28 oz each (10' long, 2" wide and 3.75" tall), an under inletduct tank of 14 oz (4" long, 5.25" wide and 2" tall) and a tank to fit beween the inlets with 14 oz.(6.75" long, 3.75" wide and 2" tall) The total set carries 84 oz. The price is $295 plus shipping for the 4 tanks or $275 plus shipping for any 3 all include the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




This set of tanks designed by Carlos Conceicao of Portugal for the Bob Fiorenze's T-38 consists of 3 tanks. A 67 oz center tank between the inlet ducts (7.5" long, 5" wide and 5.25" tall) and 2 saddle tanks of 17 oz each (6" long, 2" wide and 3.5" tall) each for a total of 101 oz. Click on the tank picture to order online




This set of tanks is designed by Mark Frankel for use in his F4D Skyray kit. These tanks flew in Mark's Skyray at the Top Gun Invitational 2001. The set consists of 2 saddle tanks carrying 46 oz each (7.75" long, 3" wide and 5" tall). A third tank has been added that increased the total capacity to 74 oz. The cost for the 3 tanks is $275 plus shipping for tanks with the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online





Yellow twin turbine F-18 tanks holding 100oz each. They install directly infront of the wing former.
10.5" long, 8" tall,3" wide per tank. The recess on the tops of the tanks cradle a round hopper tank.
Price is $220 for the pair and include the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online.




Custom molded Kevlar tank designed to fit the Yellow Aircraft F-4. This tank design was submitted by Tam Nguyen to fit into the YA F-4. This tank is designed to supply maximum capacity that would be easily accesible and be close as possible to the C.G. The tanks hold 58 oz of fuel. Price is $220 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online





Shalesh Patel's brand new F-86 measuring 8' long powered by an AMT USA Olympus.
Fuel system supplied by Jet Tech. Seen in the photo is my daughter Megan and myself.
Pair of conformal tanks carrying 103 0z each with custom machined metal tank fittings
that fit the large diameter Tygon tubing. 7.75" long, 7" tall, 4.25" at its widest part.
Price is $220 for the pair available from Jet Tech Metal fittings are optional. Click on the tank picture to order online




This is a direct replacement for the Aviation Design F-16 internal tanks. These tanks hold 40 oz each and come preassembled and pressure tested. Unlike the AD tanks, these are serviceable with the removable Jet Tech "O" Ring style Fuel Fittings. (Also see the F-16 extra fuel tanks imediately shown below)Price is $220 per pair for the internal tanks. Click on the tank picture to order online




These tanks designed by Paul Hopkins are designed to be used in the Aviation Design F-16 as extra onboard internal fuel capacity of 40oz. (Wedged shaped 4.125"long, 3.5" wide and 2.375" tall).The tanks fit along side the turbine in an opening that you need to cut in the turbine mounting plates. The price is $140 plus shipping and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




L39 fuel tank holds 94 oz as shown, however this tank can be modified both smaller and larger. Measures 8" long, 6" wide, 3.5" tall. This tank can be made longer, shorter or narrower. Base price is $140 plus modifying if needed and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online




Custom molded Kevlar tank designed to fit the Hot Spot Sport Jet distributed by GWM. This tank design was submitted by Bob Price to fit into the Hot Spot while it is being built. This tank is designed to supply maximum capacity that would be easily accesible, be close as possible to the C.G., fit into the Hot Spot with minimal design changes, and allow the builder to still use the dorsal speed brake with either a servo actuator or an air cylinder. The only change reqired is that the two rails supporting the nose gear be replaced with a bulk head and shorter rails. The tank holds 105 oz of fuel. Included is the Jet Tech "O" Ring style Fuel Fittings. The rear round portion of the tank fits into a bulkhead to secure the tank. Price is $140 Click on the tank picture to order online




Custom molded pair of Kevlar tanks designed to fit the RAM/Jet-Tech F-15 and Air Magic F-15's. These tanks have worked very well in the Hot Spot by Rei Gonzalez of RAMicrojets The pair holds 92 oz. Length is 9" Height is 3.44" Width is 3.5" Included are the Jet Tech "O" Ring style Fuel Fittings. Price is $220 pr. Click on the tank picture to order online




Molded Kevlar tank designed to fit the RAM/Jet-Tech F-15. This is the center large tank that supplies one turbine of the twin configuration. The tank holds 96 oz. Length is 10" Height is 5.25" Width is 3.5" The fuel fittings can be placed to your preferences. Price is $140 and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online.




Molded pair of Kevlar tanks designed to fit the Top Gun 1/6 scale F-16 as well as the earlier prototype Jet Tech 1/6 F-16. These tanks also fit the Josh Harel F-16 and the fiberglass version of that plane by Dean Lassek. The pair of tanks holds 98oz of fuel. Length is 6.375" Height is 6.0" Width is 5.5" Price is $220 and includes the Jet Tech "O" Ring style Fuel Fittings. Click on the tank picture to order online.




Jet Tech will design custom fuel systems to meet your applications. Jet Tech Kevlar Fuel Cells








Return to home page