 |
 |
These are the figures for the 1977 Porsche 924.
Dimensions and Weights
Length: 170.08
in./4320 mm Width: 66.34
in./1685 mm Height: 49.99
in./1270 mm Wheel
base: 94.49
in./2400 mm Wheel
track, front: 55.89
in./1418 mm Wheel
track, rear: 54.02
in./1372 mm Ground
clearance*: 4.92 in./
125 mm Turning
circle (curb to curb): 30.22
ft./9.21 m Turning
circle (wall to wall): 33.00
ft./10.00 m Curb
weight: 2623
lbs./1190 kg Maximum
load capacity: 463
lbs./210 kg Total
permissible weight: 3086
lbs./1400 kg Maximum
axle load, front: 1433
lbs./650 kg Maximum
axle load, rear: 1852
lbs./840 kg * At
total permissible weight
Engine
Bore
(in./mm): 3.41/86.50 Stroke
(in./mm): 3.32/84.40 Displacement
(cu.in./cu.cm) 121.06/1984 Compression
ratio: 8.0:1 SAE net-horsepower: 95 @
5,500 rpm SAE
net-torque: 109.2 @
3,000 rpm Max.
permissible rpm: 6,500
rpm Firing
order: 1 -- 3 --
4 -- 2
Performance*
Maximum
speed: 115
mph Acceleration
0-62 mph: 12.5
seconds Speed at
end of 1/4 mile: 18.7
seconds
*At curb
weight and half load capacity
Chassis, Suspension
Front
suspension: Independent
coil/shock absorber struts, negative king-pin
offset. Rear
suspension: Independent
-- diagonal arm, one torsion bar each. Shock
absorbers: Double
acting hydraulic shock absorbers, front and
rear. Stabilizers: Diameter:
20 mm, front -- 18 mm, rear
*All posted information is from Porsche's Model '77 924 Owner's Manual
