Air Tech 2000
This is my new Air Tech 2000, I cut the top off the case and mounted the turret right on the pump, then I cut a 2in piece of half inch PVC and put a piece of brass inside of it. I used a 6in piece of 9/16 brass for the barrel, it fitts perfectly in the brass tube that i put in the PVC. I also pluged the pump and made the "presure gauge" into an air tank.
I take the barrel off so i dont have to use a ram rod to load it.
Heres the gun with the rubber band breach system, and i heat shrink tubing on the Bic pen trigger mod.
My other stuff:
