|
All of our kits are plug and play; meaning there is no wire cutting - no custom fitting - and no stress. Just plug it right in like you would a regular bulb and your done. Step-by-step instuctions and a wiring diagram below will help you with this process. **BEWARE**
Some vehicles require more work than others due to their unique bulb housings.
1. First and foremost disconnect the car battery terminal. 2. Remove the factory light bulbs
3. Replace with McCulloch xenon bulbs. (If your vehicle has a dust cap, please replace with something equivalent to ensure a good seal.)
4. Find a mounting location for the ballast.
5. Plug Ignitor adaptor to the xenon bulbs; make sure the bulbs are secured tightly and dust cover cap is properly enclosed.
6. Run wiring harness in the engine bay.
7. Attach the power plugs to each ballast, make sure the plugs are securely placed and that it is firmly intact. 8. Reconnect the car battery cables and make sure all components are secured. 9. Turn light switch on and enjoy your brand new Xenon headlights. Allow the light to be on for 10 minutes, this is just a simple burn in procedure.
TELL YOUR FRIENDS HOW HAPPY YOU ARE - SO THEY GET A PAIR TOO =) |