Full Fingered Auger conversion
for Case IH 1020 Platforms
If you are interested in getting a more even, uniform flow of your crop from the
sickle to the threshing area of your combine, take a few minutes and look at
what we came up with for your 1020 Case IH platforms. It’s a full fingered auger
conversion that can be installed in your platform or you can bring your auger to
us and exchange it for an auger that has already been converted.
The change in the way the crop material moves across the header is dramatic, the
fingers reach out and pull the crop down under the auger rather than the crop
trying to move across the front of the auger which requires you to use the reel
to keep the crop up against the flighting of the auger, which increases
shattering. With the aggressiveness of the fingers across the entire width of
your auger pulling your crop in, you are able to lift the reel up, running it
shallower through the crop, all it needs to do is tip the crop into the auger.
The problem with crop material bunching and coming through the threshing &
cleaning process in slugs is virtually eliminated. Combining beans with a full
finger platform can now be compared to harvesting corn, I was actually able to
use the back of my combine seat this past fall, the stress level of operating
our combine in soybeans had been reduced that much, I was also disappointed that
we were finished with our 430 acres of soybeans harvesting this year, that had
never happened before.
20 ft. Platform 12 additional teeth: Call for price
25 ft. Platform 16 additional teeth: Call for price
30 ft. Platform 20 additional teeth: Call for price
The image on the right is a modified bean head (click to enlarge image).
For more information my e-mail address is
lemanst37@netllc.net
phone: 712-230-1831
Roetman Custom ask for Kendall Roetman
4131 Log Ave
Hospers, IA 51238
Sorry, but we do not offer auger conversions for John Deere bean heads. However, full fingered auger conversion for GREEN bean heads are available at:
