Weaver W9F-3D (2 Post)

$1,999
FEATURES:
Super-Symmetric (2 in 1) arms increase overall arm sweep and minimum arm reach to precisely lift vehicles Dual hydraulic chain-over style cylinders
Single-point safety release allow technician to disengage both column simultaneously
Dual Lock System in each Column
Self-lubricating UHMW Polyethylene sliders and bronze bushings
Floor plate design with a low profile drive over floor cover
Stackable adapters 1.5", 3", 6" are standard
4 Frame Adapters Included
Fits under 10' ceiling heights
Standard door guards and toe guards on lifting arms
Automatic swing arm restraints
Anchor Bolts Included (3/4" x 5 1/2" - we recommend a 3/4" drill-bit that is long enough to drill all the way through the concrete)

SPECIFICATIONS:
Lifting Capacity: 9000 LB.
Drive Thru: 103"
Motor Rating: 2HP, 220V, 1 PH, 30A
Overall Floor Width: 136 3/8"
Overall Height 111" (9' 3")
Lifting Height: 76" - 87"
Low Pad Height: 4.25"
Low Profile Floor Cover 1 7/8"
Width Between Columns: 112 1/4"
Width Outside Columns 128.5"
Column Thicknes 6mm
Shipping Weight: 1450LB.
Concrete Requirement: 4" Depth, 3000 PSI Rebar Reinforced
Base Plate: 17 " x 19 "
Column 8" x 12"
Lifting Time: 50 Seconds
Hydraulic Oil - AW32 or AW46
*Note: Asymmetric loading may be limited on some vehicles by floor cover. Front 3-Stage arm may not swing across the floor cover.
5-year structural warranty, 1-year hydraulic cylinder and 1-year warranty on power unit. Affordably priced for the commercial shop or enthusiast garage.
---------------------------------------------------

Weaver W10-HD (2 Post)

$2,499
FEATURES:
Super-Symmetric (2 in 1) arms increase overall arm sweep and minimum arm reach to precisely lift vehicles Dual hydraulic direct-drive cylinders
Single-point safety release allow technician to disengage both column simultaneously
Self-lubricating UHMW Polyethylene sliders and bronze bushings
Clear-floor design, provides unobstructed floor use
Overhead safety shut-off device prevents vehicle damage
Stackable adapters 1.5", 3", 6" are standard
4 U-Shaped Frame Adapters Included
2 height settings to accommodate taller vehicles
Standard door guards and toe guards on lifting arms
Automatic swing arm restraints
Anchor Bolts Included

SPECIFICATIONS:
Lifting Capacity: 10,000 LB.
Drive Thru: Asymmetric approx. 86" Symmetric 98"
Motor Rating: 2HP, 220V, 1 PH, 30A
Overall Floor Width: 135 7/8"
Overall Height:142.5" or 150.5" (Requires minimum 12' Ceiling)
Height to Overhead Shutoff: 134" or 142"
Lifting Height: 71.5" - 80.5"
Low Pad Height: 4"
Width Between Columns: 112 1/4"
Shipping Weight: 1650-LB.
Concrete Requirement: 4" Depth, 3000 PSI Rebar Reinforced
Base Plate: 17.5" x 19.5" x 5/8"'
Column & Carriage Thickness 5mm
Arm thickness 6mm
Lifting Time: 50 Seconds
Long Arm Range: 37.25" - 58"
Short Arm Range: 24.25" - 42.25"
Hydraulic Oil - AW32 or AW46
5-year structural warranty, 1-year hydraulic cylinder and 1-year warranty on power unit. Affordably priced for the commercial shop or enthusiast garage.
---------------------------------------------------

Weaver Pro-Park 8 (4 Post)

$2,899
FEATURES:
Increased Lift Height
Commercial Grade
Double Lock Ladder Safety System
Steel Approach Ramps
Powder Coat Finish
8,000 LB. Capacity
Diamond Plate Runways
Single Point Lock Release
9 Locking Positions (under runway) 20", 26", 32", 38", 44", 50", 56", 62" & 68"
INCLUDED Jack tray
INCLUDED Caster kit (polyurethane wheels)
INCLUDED 4 Drip trays
Available in Black color only.

SPECIFICATIONS:
Distance Between Runways: 37.50"
Wheelbase: 150.00"
Runway Length: 166.00"
Approach Ramp Length: 37.00"
Column Dimension 145mm x 74mm
Column Thickness 4mm (8 gauge)
Baseplate Thickness 10mm
Runway Thickness 5mm (6 gauge)
Cable Diameter 3/8
Lift Capacity: 8000 LB
Power Requirements: 110V
Concrete: 4.00" 3000 PSI Rebar Reinforced Concreted
Shipping Weight: 1780 LBS
Hydraulic Oil - AW32 or AW46
A - Clearance Under Runway: 5' 8'' (68")
B - Overall Length: 17' 3.5" (207.5")
C - Overall Width: 9' 7" (115") with motor, 8' 7.5" (103.5") without motor, Optional Re-position Bracket
D - Inside Column: 7' 10" (94")
E - Overall Length w/out Ramps: 14' 7.5" (175.5")
F - Column Height: 6' 9.5" (81.5")
G - Runway Width: 1' 6.5" (18.5")
H - Runway Height: 4.5"
I - Distance Between Runways: 3' 2" (38")
---------------------------------------------------

Challenger LE-10 (2 Post)

$2,750

SPECIFICATIONS:
Lifting Capacity 10,000 lbs.
Lifting Configuration Symmetric & Asymmetric
Arms 3-stage front/2-stage rear
Rise Height 74.75
Overall Height 143.875
Overall Height (Cylinder Extended) 143.875
2 Height Extension Available Yes
Overall Width 131.75
Drive-Thru Clearance 98.375
Floor to Overhead Switch 137
Front Arm Reach 21.75 / 39.25
Rear Arm Reach 38.75 / 55.375
Screw Pad Height 4.25 / 6.75
Inside Columns 110.25
Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph
Speed of Rise 43 s
Ceiling Height Required 12
ALI/ETL Certified Yes
Colors Available Red, Blue
---------------------------------------------------

Challenger E-12 (2 Post)

$4,250

SPECIFICATIONS:
Lifting Capacity 12,000 lbs.
Arms 2-stage front/2-stage rear
Lifting Configuration Symmetric
Rise Height 77.75
Overall Height 166/175
2 Height Extension Available Yes
Overall Width 139.75
Drive-Thru Clearance 103
Floor to Overhead Switch 159.5/168.5
Minimum Arm Reach 35.75
Maximum Arm Reach 54.5
Screw Pad Height 5.25-6.75
Inside Columns 115
Ceiling Height Required 167/176
Motor / Voltage 2HP, 208v - 230v
Speed of Rise 61 s
ALI/ETL Certified Yes
Colors Available Red, Blue
---------------------------------------------------

Challenger CL4P7 (4 Post)

$2,750

SPECIFICATIONS:
Lifting Capacity 7,000 lbs.
Length Overall 195.5
Width Overall 100.5
Inside Columns 92.125
Between Columns 147.5
Height of Columns 6 7.5
Height of Runways (Floor to top of Runway) 5.75
Width of Runways 20
Width Between Runways 38
Rise Height (Top of Runway at top position) 68.125
Clearance Height (Storage) 63'
Max. Wheelbase* 141.5
Crossbeam Clearance Height 63
Motor 1HP/2HP
Voltage (1 Phase Std) 115v/230v
Speed of Rise (115v/230v) 120/60 s
Min. Recommended Bay Size 10 x 20
ALI/ETL Certified Yes
Colors Available Black
---------------------------------------------------

Challenger DX77 (Scissor Lift)

$8,250

SPECIFICATIONS:
Lifting Capacity 7,700 lbs.
Installation Standard
Rise Height 74.5
Overall Length 83.25
Overall Width 82
Platform Length 59
Platform Width 24.5
Width Between Platforms 21 - 27
Ramp Length 11.75
Lowered Height 4.5
Motor 2HP, Single Phase, 60Hz
Voltage 208/220v
Air Supply Required 90 - 120 psi
Speed of Rise 43s
Max Load per Platform 3,850 lbs.
Colors Available Black
---------------------------------------------------

Atlas 414 (4 Post)

$4,645

SPECIFICATIONS:
Capacity 14,000 LB.
Lifting Height 74" (6' 2")
Overall Width of Columns (Without Motor) 130 1/2" (10' 10 1/2")
Overall Width of Columns (With Motor) 142" (11' 10")
Overall Length with Approach Ramps 256 1/2" (21' 4 1/2")
Overall Length without Approach Ramps 217 3/8" (18' 1 3/8")
Length Between Columns 196 3/4" (16' 4 3/4")
Runway Length 207" (17' 3")
Runway Width 22"
Thickness of Runway 6 1/2"
Width Between Runways 44" (3' 8") *
Width Between Runway Rails 40 3/8" (3' 4 3/8") *
Outside Runway to Outside Runway 83 5/8" (6' 11 5/8")*
Clearance Under Runways 67 1/2" (5' 7 1/2")
Column Dimension 8 1/2" x 5 1/2"
Base of Column 12" x 9 1/2"
Clearance Between columns 116" (9' 8")
Height of Columns 86" (7' 2")
Maximum Wheel Base 186" (15' 6")
Drive Thru 102" (8' 6")
Column Thickness of Steel 3.5mm
Platform Thickness of Steel 6mm
Cross Beam Thickness of Steel 6mm
Cable Diameter 1/2"
Motor 2 HP 220V +/- 5% (209-231volts) 1 phase.
A 30 amp breaker is required.
Oil Requirement 3-5 Gallons AW32/AW46
Shipping Weight 3,200 LBS.
Ramp Length 50" (4' 2")
---------------------------------------------------

EMail: rakoon00@yahoo.com
Phone: (903) 456-3048

HOME