Extreme Composites
170 Inwood Dr
Rockdale, TX 76567
512-446-6117
C-Tech Ram Air Box
Installation
For GM TBI Engines
Caution: Ram air kit is intended for off road use only, and not for severe weather. Do not flood scoop with water when washing truck or any other time. Excessive water in air box from any source will cause severe engine damage.
1.Remove
existing air filter and housing.
2.Test
fit air box to your throttle body
3.Your
throttle body will have one or two air cleaner bolts. If it has 1 bolt in the
center, use a 1/4th inch X 20 bolt and weld one piece of the
enclosed steel tubing to the center of the bracket.
If
it has 2 bolts for the air cleaner use 6mm bolts and weld both pieces of the
enclosed steel tubing where they match up to the bolts on the throttle body.
4.After
welding is done and the plate and airbox fit correctly, bond metal plate to air
box interior with short strand fiberglass reinforced body filler.
5.Apply adhesive back weather stripping to flange. Use K&N filter # 33-2015.
