Nokia DLR-3 Cable Schematics

You are visitor

Back to Documents Index

READ-> The schematic diagrams and some PCB designs displayed in this page have been gathered from freely available sources from the net. These schematics are here for your reference only. I cannot guarantee their accuracy. In short, I cannot guarantee they will work, though they were claimed to work. These diagrams are mainly self-explanatory and it is assumed you have at least the basic skills in Electronics to build one of these. Any info missing is taken as is, so don't ask me about it.

Basic Info: Serial connector is a female DB-9 that connects to the COMx port. The MBUS, FBUS Rx & Tx, and Gnd lines connect to the terminals of the Nokia phone (varies in models). The DLR-3 cable has a PIC Microchip that need to be programmed for the cable to work. I don't have the HEX file and I don't have a link for it.

If you want to build a working DLR-3 compatible cable, go here

Yolly Zubrick aka Pax Man © 2003.

No part of this page may be copied in any form without asking authorization from me. Please link here if you wish but don't mirror it.

Back to Documents Index