Multi-mode detection is achieved with two types of sensing systems.
Each system is designed to give maximum detection to the various
types of propulsion systems used by alien space craft. This electronic detector responds to Pulsed Mode, Static Mode, Dynamic
Mode, Alternating Mode, and any combination of the these Modes.
The sensitivity of this U.F.O. Detector is also adjustable so that the user can set the Detector for the best possible location conditions.
( In some areas the static and dynamic fields could possibly give a false indication if set too high.) By adjusting the sensitivity to
the capture threshold at each new location, the best results can be achieved. The detection system is so sensitive that it will trigger
when near active tvs, microwaves, power tools, computers, monitors, Etc. A simple way of determining the functionality of the
detector is to place it in the vicinity of one of these items.
The electronic circuits use micropower integrated circuits to maximize battery life. The unit does not need a power on/off switch,
nor does it need an AC adapter, since the detector can operate one or more years continuously using a low cost 9 volt battery.
The detector will be in the capture mode when the Green Light on the front panel LIGHTS. At the same time Capture Delay, red and
yellow lights on the front panel will Blink, and U.F.O. Alert, red light on the top of the detector will Blink. The detector will also sound a Beeping Signal.
It will be out of the capture mode when the Front Panel Green Light goes OFF. The beeper and other lights will continue to beep and blink for about 30 seconds after the Green Light goes OFF.
This UFO Detector is able to sense when there is a major change in the earth's magnetic force fields caused by any UFO phenomena. When
a disturbance of the type emanating from a probable UFO, it will flash its lights and emit a beeping alarm.
Depending on sensitivity setting, this detector is able to sense the field disturbance within a
25 to 200 mile radius of the object.
At max sensitivity, the range is the greatest.
When carried in a shirt pocket, a
EMM-1 & EMM-2 INFO
Multi-mode detection is achieved with two types of sensing systems.
Each system is designed to give maximum detection to the various
types of propulsion systems used by alien space craft. This electronic detector responds to Pulsed Mode, Static Mode, Dynamic
Mode, Alternating Mode, and any combination of the these Modes.
red led is viewable through the top end of the case.
