 | Top mitered to fit - So that when the sub is assembled there are no
visible seams. |
| Air tight lock miter on sides - using special machinery we were able to
form joining planes with a locking mechanism to allow a pressure holding
hold so no need for caulk. |
| Lock Miter tested - several tests were done to ensure perfect matching
of joints. |
| Precision Measured - Using shims and various clamps we were able to
assemble the enclosure with a very small margin of error. Very critical when
assembling an enclosure with angles. |
| Pocket screws and drill press holes - more machinery used to precision
center holes for brace to maintain optimal structural integrity and
uniformity. |
| Long screws - countersunk steel screws hold the brace together along
with liquid nails and Titebond yellow glue to help strengthen the enclosure.
|
| Double bladed (scoring saw) table saw - A shot of the cut process on an
industrial table saw able to cleanly cut the aluminum and maple laminate. |
| Clamped - Utilizing special C clamps that are able to hold tightly
angled planes together where standard clamps fail.
Pictures of the 15" Adire Tempest Driver
|
