Site hosted by Angelfire.com: Build your free website today!

If you haven't yet, visit my web site; The Weird World of Jack

Contents

Many tire types available!

--------------------------------------------------------

#RSS ... T-Jet Ribbed Standards
Looks stock, but wider and lower. A .385"od tire versus the stock Aurora rubber at .405"od. For standard T-Jet and many other vintage HO car wheels
$.90 per pair ......or...... 100+ pairs @ $.50 per pair

--------------------------------------------------------

#RST ... T-Jet Ribbed *Thins*
Same as Standards, but thinner for use inside those fenders like on MEV Original cars. These are also great for use in racing on *Hobby-Pro* and *Wizzard* independent front wheels. A .385"od tire that is .075" thick. For standard T-Jet and many other vintage HO car wheels
$.90 per pair ......or...... 100+ pairs @ $.50 per pair

--------------------------------------------------------

 
#RSL ... Ribbed Lo-Profile
A .350" diameter Ribbed tire for stock wheels. The stock tire in on the left, the new Lo-Profile tire is on the right.
$.90 per pair ......or...... 100+ pairs @ $.50 per pair

--------------------------------------------------------

#RSLT ... T-Jet Ribbed *Lo-Profile Thin*
Primarily designed for use in racing on *Hobby-Pro* and *Wizzard* independent front wheels. A .350"od tire that is only .075" thick. For standard T-Jet and many other vintage HO car wheels
$.90 per pair ......or...... 100+ pairs @ $.50 per pair

--------------------------------------------------------

 
#BR ... BAUER silicone tires!
A wide, lo-profile tire designed for those cool Bauer wheels (Bauer tire on the right in photo). Lo-Profile to get the overall dimension in the same range as the Ribbed Standard tire (on the left in photo).
$.90 per pair ......or...... 100+ pairs @ $.50 per pair

--------------------------------------------------------

 
#RSW ... Ribbed Standard White Sidewall
The same quality Ribbed Standard tire, but with a classic wide white sidewall.
$3.00 per set of 4

--------------------------------------------------------

 
#HRLW ... Hot Rod Lo-Profile Whitewalls
A low profile .450"od tire for Hot Rod wheels. Low for mounting with front axle in "long" position.
$2.50 per pair
 
#HRWW ... Hot Rod Washer Whitewalls
Stock Aurora "washer" size hot rod slicks, with whitewalls
$2.50 per pair
 
#HRWWW ... Hot Rod Washer "WIDE" Whitewalls
A wider, radiused edge version of the hot rod "washer" slick, same price.
$2.50 per pair

--------------------------------------------------------

 
#HRLB ... Hot Rod Lo-Pros (blackwalls)
A low profile .450"od tire for Hot Rod, Indycar and Truck type wheels
$1.10 per pair ......or...... 50+ pairs @ $.65 per pair

--------------------------------------------------------

 
#TO ... Tuff-Ones
Wide .430"od tire especially for Tuff-Ones wheels
$1.10 per pair ......or...... 50+ pairs @ $.65 per pair

--------------------------------------------------------

 
#AFXS ... A/FX Standards
General purpose .475"od tire for A/FX (1st Generation and Magna-Traction)
$1.10 per pair ......or...... 50+ pairs @ $.65 per pair

--------------------------------------------------------

 
#AFXBU ... A/FX Butt-Uglies
Low profile .440"od tire for A/FX (1st Generation and Magna-Traction)
$1.10 per pair ......or...... 50+ pairs @ $.65 per pair

--------------------------------------------------------

 
#O148 ... Aurora 1/48 (O-gauge) rear tires
A plain .675"od and .225" wide racing tire for the O cars. Limited quantities, by special order only.
$2.00 per pair

--------------------------------------------------------

Resin Parts and Scenic Bits.

 
#DRIV6 ... Resin Drivers
Six reproduction "Auto World" heads (cast in front and rear halves), two Aurora T-Jet torsos and two Aurora AFX torsos. Inexpensive drivers for those empty PM cockpits!
$3.00 per set

.

 
#DRIVT ... ***NEW*** T-JET one-piece Resin Drivers
Resin reproduction of an early Aurora T-Jet driver figure. Cast in tan resin as one-piece. Perfect for rebuilding an original car or populating a PM or MM Inc cockpit.
$1.00 each...or...$10.00 per dozen (12 drivers)

.

 
#MINT ... ***NEW*** Mercedes SL190 Interior, Boot, & Driver
Bucket seat interior plate for the Lionel Mercedes SL190. Finally, fill that hole in those old Lionel Mercedes cars that are inexpensive but never seem to have a roof piece! Reproduction Aurora driver figure is cast as one complete separate piece.
$3.00 per set

.

 
#WINT ... Willys Interior, Boot, & Driver
Bench seat interior plate for a Willys Business Coupe. Fits the Aurora, MM Inc, and PM Willys bodies. It's ideal for chopping the Willys Coupe top to make a hot rod convertible. Reproduction Aurora driver figure is cast as one complete separate piece.
The car in the photo is an excellent conversion done by Tim Vassa using a flamed Willys and a Rocket Science Ltd resin kit.
$3.00 per set

.

 
#CINT ... '55 Chevy Interior, Boot, & Driver
Bench seat interior plate for the MM Inc '55 Chevy. Great for adding interior detail to your '55. It's also ideal for chopping the Chevy to make a convertible. Reproduction Aurora driver figure is cast as one complete separate piece.
$3.00 per set

.

#APIT ... Atlas Pit building - resin reproduction
A nice resin kit of the old 60's Atlas *Pit* building. Kit includes the 4 sides, roof, interior and side stickers, and the air compressor.
It can also be used under the currently produced Atlas "restaurant" building to make the 60's "Comtrol Tower" (see photo below pit building of the Control Tower that I'm working on). Or you can join several of these buildings end to end and make a nice pit row (I used 9 of them to make my pits).
$7.00 per kit

 

.

#BSTACK ... Reproduction hollow silicone 1960's Atlas hay bale stacks
Okay, this is a stack of hay bales, hollow in the center and made from nice cushiony silicone. Size is 1.625" long, .50" wide and .375" high. Below are side and top views.
$1.00 per stack

.

 
#BSTRIP ... Barrier Bales
The same basic hay bales as the Atlas stack. However, these are .25" wide (a single row, two bales high). Each unit is twelve bales long, making it about 6.25". These have a plain back and are designed to be used in front of buildings, or glued to barrier walls.
$2.50 per 6" strip

Here's stuff that is in development and testing.

 
Production has kept me so busy that I have had no time to work on new things.

 

 

Back to Top

Contact Information

 

Add $2.00 per order shipping in the lower 48 states.
To place an order or get more information, email Weird Jack in the Basement Lab!

Back to Top