Site hosted by Build your free website today!

Alpine CDA-7998 CD/MP3 Receiver
Alpine CHA-S634 6-disc Ai-NET CD/MP3 Changer
Alpine KAE-216C 2 6-disc CD Changer Magazine Package(2=24disc)

Head Unit: Alpine CDA-7998 or 7897 CD/MP3/TUNER/CHANGER CONTROLLER ($800) — this unit includes Alpine’s i -Personalize feature for the best use of product settings and benefits. It will be installed at the OEM location using the necessary dash kit and harness adapter.

CDA-7998 - - [$800]

CDA-7897 - - [$600]

Amplifier: Alpine MRV-F450 5-channel amp ($500) — Includes V12 design with the appropriate top-mounted controls. It will be installed on the back of the left rear seat, allowing fold down capabilities.

  • 50 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
  • 60 watts RMS x 4 at 2 ohms + 200 watts RMS x 1 at 4 ohms
  • 120 watts RMS x 2 + 200 watts RMS x 1 in bridged mode
  • 2-, 3-, 4-, or 5-channel output
  • Tri-Way capable
  • requires 8-gauge power and ground leads - wiring and hardware not included with amplifier
  • Bass Engine features:
  • MOSFET power supply
  • STAR Topology (minimizes internal noise and prevents ground interference)
  • oversized power and ground connections
  • gold-plated screw terminals
  • top-mounted controls with cover
  • detachable front cover
  • blue power LED
  • 16-9/16"W x 2-1/2"H x 11-1/4"D (depth is 10" with front cover removed)
  • 1-year warranty

    Front Speakers: Alpine SPX-177A 6.5-inch component two way ($400) — The SPX-177A components feature passive crossovers with numerous adjustments in order to ensure optimal sound staging and tonality. These will be installed at the OEM door locations, with tweeters flush mounted on door panels close to the mid-bass.

    Rear Speakers: Alpine SPR-694A 6 x 9 coaxial ($200) — these speakers offer good construction and tonality for rear/ambient use. These will be installed at OEM locations under the package tray.

    Subwoofer: Alpine SBR-102CR 10-inch Subs [2] ($280 each) in a compound reflex enclosure — The pre-fabricated, computer-optimized enclosure will be installed in the trunk at the back of rear seats, firing towards the rear of car with quick disconnect hardware for easy removal.

    • Sensitivity: 85 dB
    • RMS Power Range : 300 Watts
    • Peak Power Handling: 1000 Watts
    • Impedance: 4 Ohm
    • Low Frequency response: 28 Hz
    • High Frequency Response: 2000 Hz
    • Diameter: 10 Inch
    • Frequency Response: 28Hz - 2kHz
    • Dual Voice Coil Design
    • Kevlar Reinforced Pulp Cone
    • High Excursion 1" Santopreneฎ Surround
    • Dual Custom Progressive Nomex Spiders
    • Integrated Tinsel Lead Design
    • Custom Cast Aluminum Frame
    • Extra Length Extended Pole
    • Flared Pole Vent
    • Bumped Backplate
    • Heat Transfer Plate
    • High Strength Brass Voice Coil Bobbin
    • Double Stacked Magnets
    • Heavy Duty 8ga. Push Terminals
    • Oversized Parabolic Dustcap
    • Magnetically Optimized Motor Structure

    Sound Damping: Dynamat ($150) as needed at the doors and trunk

    Amp Power Kit: #4 (+/-) with 100-amp circuit breaker ($120)

    Signal Cables: True balanced, twisted pair [3 pair] ($120)

    Capacitor: 1-Farad with good tolerance ($140)

    Shop Supplies, Speaker Wire, Hardware: as needed ($80)

    Dash Kit/Harness Adapter: Using proper supplier ($30)