- There is a restriction
on the Magic 2 v7 applicable to PAL PS2s whereby it can only play PS1
games for the same region as the PS2. So a PAL v7 can only play PAL PS1
games
With the disk assumed
in the tray and the tray closed:
- For PS2 games, power up
normally from STANDBY with RESET button. A single tap is required.
- For PS1 games & DVD
Movies, power up from STANDBY with RESET button held until the blue
EJECT light comes on; then release RESET and the disk will boot.
- Please turn off the PS2
(to standby) before changing Mode (PS1/PS2/DVD)
- For soldering the power
and ground wires, please use a thicker cable (22awg=21swg)
- For soldering to the
other points, please use 32awg = 34swg cable
These mods
are intended to be installed by experienced
technicians only. Previous experience in installing PSX mod chips counts
for nothing. We will not will not be help
responsible if you damage your console as a result of poor fitting.