Back to Site Map

As you can see the green skirt around the bottom edge of our layout hides a multitude of sins. It covers and dresses up the courser construction, legs, shelves and such. It also hides the electronics tools storage and programming computer.  Robbin hand sewed the pleated skirt and it's attached by Velcro.

On the left, a HP variable power supply, used for project prototyping.  Currently running the RXR lights. To the right of it is my temporary switch board and control area.  Eventually I'll put together a nice black plexy glass switch board..  My DC power supply (center) is only handling snap switch power and city lights power now that the DCC is in. Right of that is the Digitrax DB150 and power supply.  On the far right is my soldering station.  

This is my DCC programming area.  I was fortunate enough to have an extra Pentium 150Mhz system that I loaded Windows 98 on and use solely for the PR1 Programming.  You can see my programming track in the lower right.