vmax tech stuff

All in one place. Please click any of the above to goto Matt McCabe's website (http://vmax.us/)
Thanks Matt for providing us this info.

# 4116 DynoJet Stage 1 Kit Contents
Quantity	Description	Part #
4	Main Jets	DJ165	Kit recommendation for stock exhaust
4	Main Jets	DJ160
4	Main Jets	DJ170	Kit recommendation for aftermarket exhaust
4	Pilot Air Jets	DJ150	To replace PAJ2 jets if required
4	Slide Springs	DSP044	Short light tension slide springs
4	Fuel Needles	DNT306
4	Adj. Washers	DW0001	Needle Washers
4	E-Clips	DE0001	Needle C/E Clips
1	Plug Drill	DD#5/32	For removing factory pilot plugs
1	Slide Drill	DD#19	For enlarging slide lift holes
1	Screw	DS0001	For removing factory pilot plugs

# 4716 DynoJet Stage 7 Kit Contents
Quantity	Description	Part #
4	Main Jets	DJ165	Kit recommendation for modified stock exhaust
4	Main Jets	DJ190
4	Main Jets	DJ175	Kit recommendation for aftermarket exhaust
4	Main Air Jets	DCO402	Actually a corrector, factory MAJ is not removed
4	Slide Springs	DSP044	Short light tension slide springs
4	Fuel Needles	DNT426
4	Adj. Washers	DW0001	Needle Washers
4	Adj. Washers	DE0001	Needle C/E Clips
1	Plug Drill	DD#5/32	For removing factory pilot plugs
1	Slide Drill	DD#19	For enlarging slide lift holes
1	Screw	DS0001	For removing factory pilot plugs
1	Tool	DT0002	Used to install Main Air Jet correctors
1	Glue	DA0001	Used to secure Main Air Jet correctors
2	Manifolds	DJ7010	V-boost manifold replacements - open tubes
1	Breather Assembly	DJ7012	Crankcase ventilation adaptation to front filters
1	Orifice	DJ7011	Adapts stock crankcase vent tube