Site hosted by Build your free website today!

(By Johann the Deaf as appeared in the October 1989 Bolt)

key.gif (1211 bytes)

SUBJECT: Crossbow, part 2
Remember when I said this would be a three part project? Well, I lied! Those of you who know me won't be surprised, Those of you who don't know me . . . won't be surprised.

Oh well, down to work.

1. Make Figure A out of a piece of steel 1 1/2" x 3/4" x 1/8". Weld a 3/8" steel rod, 1 1/2" long at Point A.

2. Make Figure B out of a piece of steel 18" x 1 1/2" x 1/8".

3. Make Figure C out of 1/4" rod. Weld all together.

4. Weld a 3/8" rod, 2 1/2" long, as shown in Figure D.

8910xbow.gif (4406 bytes)

 Page last updated 12/27/99