Site hosted by Angelfire.com: Build your free website today!
Setting Up An Fserve on Invision 2.0

Step 1: Getting Started

► First off, you will need Invision 2.0 running on mIRC 6.14 (Newer versions of mIRC do not allowed the fserve on Invision to run correctly). We've supplied the necessary files on the Downloads Page. You'll first need to install mIRC 6.14 to a fresh directory (We recommend C:\mIRC). Then, without running that mIRC, downlaod the Invision full install and install to that same directory over your mIRC 6.14. You will now be able to connect to IRC through invision.

.

.

Step 2: Setting Up Your File Server

► After You've Loaded Invision, you will need to go to the menu you up top and select Invision > File Server Manager. A settings menu will pop-up. Follow the Screen Shot below and make your tab look EXACTALLY like it.

After you are done with this click "Apply" so the settings save.

.

.

Step 3: Setting Up Your Trigger

► Once your settings are updated, you will need to switch to the Triggers Tab in the File Server Manager. (The Setup and Triggers tabs are the ONLY tabs you shoudl alter. Do NOT edit the Records or Scheduler tabs). Again we have supplied a Screen Shot of this tab. Copy it EXACTALLY on your tab. (You May Change The "Tv" trigger in the box to a trigger of your liking).

After you've done this, click "Apply" then "OK" and you're done, your file server will start next time you connect to the irc network with invision (or when you manually start it).