Question: My system seems sluggish. I know it has to do with all the programs that sit in my system tray, but how can I keep these programs from running at startup?

Answer: I hate it when I install programs and they insist on starting when I boot the computer. You know the drill. You install something and it places an icon in your system tray .

All those little icons you see in your system tray represent programs that are RUNNING. If a bunch of stuff loads when you start your computer, you may be maxing out your system before you launch your first regular program. So, if you find your computer getting progressively slower as you add more software, it could be that these system tray icons are, at least partially, at fault.

In addition, program running in your system tray can cause any (or all) of the following problems:

- Sluggish system speed

- Frequent lockups / illegal operations

- Software install problems

- Difficulty in running some programs

The more of these programs you have running, the more likely it is that you're going to see one or more of the problems mentioned above. Granted, System Tray programs are not the only cause for the conditions mentioned above, but they are the first place to look.

So,

1. Click the Start button and select Run...

2. Next, type in:

msconfig

Then hit OK.

3. The System Configuration Utility should run (please note that not all computers have it installed -see note below).

4. Click the Startup tab .

5. You'll see a listing of all the stuff that starts itself when your computer does. Just uncheck the programs you don't want to load and leave the rest alone.

Note - If you don't have msconfig on your system (win 95 / 2000 doesn't) then check out Startup Control Panel at:

It does basically the same thing.

Once you get msconfig or the program above running, you'll probably see more stuff than you bargained for. I would advise exercising caution while unchecking, especially if you're not sure about what program(s) you're suppressing. Stuff like " Scan Registry " and " System tray " are probably best left alone. If you see stuff that you recognize as being non-essential software, than uncheck it. This is one of those do at your own risk things - for sure.

If you're not sure which program is being referred to, look at the path. Sometimes the folder just before the ".exe" file can give you a clue as to what program you're dealing with.

For example, if I see something like:

I can guess the program in question is the ever annoying Real Player.

In general, don't disable stuff that starts like this:

Or stuff like this:

These are more likely to be important system files and programs. You may find that your computer won't run without them and you'll have to go into Safe mode to get things working again.

Finally, note that unchecking this stuff doesn't remove it. The idea behind having these programs start when the computer does is to give you fast, easy access to them. However, having too many of these programs running at the same time can hit you hard in the system resources department. I personally make sure anything I don't need isn't running. If I need it, I'll click on it's shortcut.

       

To convert a FAT partition to NTFS, perform the following steps.

1..Click Start, click Programs, and then click Command Prompt.

2..In Windows XP, click Start, click Run, type cmd and then click OK.

3..At the command prompt, type CONVERT [driveletter]: /FS:NTFS.

Convert.exe will attempt to convert the partition to NTFS.

NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).

You've read the reviews and digested the key feature enhancements and operational changes. Now it's time to delve a bit deeper and uncover some of Windows XP's secrets.

1. It boasts how long it can stay up. Whereas previous versions of Windows were coy about how long they went between boots, XP is positively proud of its stamina. Go to the Command Prompt in the Accessories menu from the All Programs start button option, and then type 'systeminfo'. The computer will produce a lot of useful info, including the uptime. If you want to keep these, type 'systeminfo > info.txt'. This creates a file called info.txt you can look at later with Notepad. (Professional Edition only).

2. You can delete files immediately, without having them move to the Recycle Bin first. Go to the Start menu, select Run... and type 'gpedit.msc'; then select User Configuration, Administrative Templates, Windows Components, Windows Explorer and find the Do not move deleted files to the Recycle Bin setting. Set it. Poking around in gpedit will reveal a great many interface and system options, but take care -- some may stop your computer behaving as you wish. (Professional Edition only).

3. You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right mouse click, and enter 'rundll32.exe user32.dll,LockWorkStation' in the location field. Give the shortcut a name you like. That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do the same.

4. XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.

5. For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate' and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems, and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options -- they're all far too baroque to go into here.

6. XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than your ISP has, so you can only experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then 'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry and don't bother.

7. You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.

8. XP will treat Zip files like folders, which is nice if you've got a fast machine. On slower machines, you can make XP leave zip files well alone by typing 'regsvr32 /u zipfldr.dll' at the command line. If you change your mind later, you can put things back as they were by typing 'regsvr32 zipfldr.dll'.

9. XP has ClearType -- Microsoft's anti-aliasing font display technology -- but doesn't have it enabled by default. It's well worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType on the Welcome login screen as well, set the registry entry HKEY_USERS/.DEFAULT/Control Panel/Desktop/FontSmoothingType to 2.

10. You can use Remote Assistance to help a friend who's using network address translation (NAT) on a home network, but not automatically. Get your pal to email you a Remote Assistance invitation and edit the file. Under the RCTICKET attribute will be a NAT IP address, like 192.168.1.10. Replace this with your chum's real IP address -- they can find this out by going to www.whatismyip.com -- and get them to make sure that they've got port 3389 open on their firewall and forwarded to the errant computer.

11. You can run a program as a different user without logging out and back in again. Right click the icon, select Run As... and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you need to have administrative permissions to install a program, which many require. Note that you can have some fun by running programs multiple times on the same system as different users, but this can have unforeseen effects.

12. Windows XP can be very insistent about you checking for auto updates, registering a Passport, using Windows Messenger and so on. After a while, the nagging goes away, but if you feel you might slip the bonds of sanity before that point, run Regedit, go to HKEY_CURRENT_USER/Software/Microsoft/Windows/Current Version/Explorer/Advanced and create a DWORD value called EnableBalloonTips with a value of 0.

13. You can start up without needing to enter a user name or password. Select Run... from the start menu and type 'control userpasswords2', which will open the user accounts application. On the Users tab, clear the box for Users Must Enter A User Name And Password To Use This Computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use.

14. Internet Explorer 6 will automatically delete temporary files, but only if you tell it to. Start the browser, select Tools / Internet Options... and Advanced, go down to the Security area and check the box to Empty Temporary Internet Files folder when browser is closed.

15. XP comes with a free Network Activity Light, just in case you can't see the LEDs twinkle on your network card. Right click on My Network Places on the desktop, then select Properties. Right click on the description for your LAN or dial-up connection, select Properties, then check the Show icon in notification area when connected box. You'll now see a tiny network icon on the right of your task bar that glimmers nicely during network traffic.

16. The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0.

17. You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them. Also, in a folder you can arrange icons in alphabetised groups by View, Arrange Icon By... Show In Groups.

18. Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and display it.

19. Windows key + Break brings up the System Properties dialogue box; Windows key + D brings up the desktop; Windows key + Tab moves through the taskbar buttons.

20. Hide 'User Accounts' from users

Go to Start/Run, and type:

GPEDIT.MSC

Open the path

User Config > Admin Templates > Control Panel

doubleclick "Hide specified Control Panel applets"

put a dot in 'enabled', then click 'Show"

click Add button,

type "nusrmgt.cpl" into the add box.

Ó By jafferkhan.info.ms and J   Brothers (www.smilep-nartopa.co.nr) attock - All right Reserved.