-------------------------------
ANGEL AND PIMP IN 20 STEPS
-------------------------------
Okay. First off, in order for any of the below steps to apply, you will need to
register on UtopiaPIMP first. Please ask a leading province for your PIMP code.
Go to http://www.utopiapimp.com/ and register on there. That will set you up to
do the below steps.
Now you will need to load your kingdom data into PIMP. This is really simple!!!
:D Here are the steps to setting it up and using it:
1 - Download and install Angel, Register on PIMP
2 - Log in to Utopia and copy your entire Throne page. This will load your
province into Angel.
Now we're going to practice loading information into PIMP.
3 - Open another window and Log in to PIMP
4 - In your Utopia window, click on The Kingdom and copy the entire page. Angel
should pop up and format the data for you.
5 - Switch to your PIMP window and paste the data into the box in the top right
corner. Press Add This Data.
6 - You will see that the Kingdom (KD) page has been updated, and if you scroll
to the bottom, you will see YOUR province name as 'Kingdom page last updated
0.01 hours ago (submitted by <your province name>)'
Now lets tell Angel how to upload information automatically into PIMP.
7 - Right click on Angel in your taskbar and select Settings. Here's everything
that controls Angel... be careful :D
8 - Click on the Special Agents tab; select Forum Agent
9a - Check the following boxes:
---- Automatically send queue every 5 minutes
---- Automatically Add intel to Forum Agent queue
---- Log File Rollover Size: 50 KB
---- Purge unsent entries after 5 days
9b - Uncheck the following boxes:
---- Exclude Intel from my own kingdom
---- Show baloon tip when adding to queue
10 - Click New
11 - Enter the following information:
---- Display Name: UtopiaPIMP
---- URL: http://www.utopiapimp.com/wol
---- Forum Name: UtopiaPIMP
---- Username: <Enter your PIMP username>
---- Password: <Enter your PIMP password>
---- Forum Password: <Leave Blank>
12 - Click OK, make sure your UtopiaPIMP entry is checked, and click OK
Now that PIMP and Angel have met, let's give them something to talk about.
13 - Click on Throne and copy the entire page
14 - Click on Growth, Click on Internal Affairs Advisor, and copy the entire
page
15 - Click on Science and copy the entire page
16 - Click on Military, Click on Military Advisor, and copy the entire page
17 - Right click on Angel in your taskbar and select Forum Agent. You will see
all of the information you just uploaded.
18 - Click on Send Intel Now. It will transmit, and post a message 'Data sent
sucessfully!' at the bottom
19 - Switch over to your PIMP window. Refresh the screen, and you should see
green boxes next to your province.
20 - Click on your province name. Every little detail has been loaded and will
show up on this screen.
That's it!!! Angel and PIMP in 20 steps! Really simple! Now you can do it on a
constant basis every time you log in!
Just a word to the wise: Angel will only send 4 pages to PIMP: Throne, Internal
Affairs Advisor, Science, and Military Affairs. However, we still need to update
news and Kingdom information. To manually update these, copy each of the
following links and post one at a time in the PIMP window manually: The Kingdom,
Last Month, The Paper. That way we are COMPLETELY up to date! :D
