Site hosted by Angelfire.com: Build your free website today!
Switch to English Guide
YaBB Quick Start Guide

Setting up your YaBB

For detailed instructions, please view YaBB Codex Installation Guide.

The Setup ScreenNow that you have everything edited, uploaded and give the proper chmod, it's time to begin the final step in the process. To do this, you will need to point your browser to the Setup.pl Setup Utility. This is located in the same directory you installed YaBB in. (http://www.yoursite.com/cgi-bin/yabb/Setup.pl Adjust URL as needed.).

Running the Setup Utility

  1. Once you have loaded Setup.pl in your browser, you will be asked to provide the password for the setup. This is a security measure to prevent web strangers from editing your YaBB settings. Since this is a brand new install, the default admin password needs to be given. So in the box, type in "admin" (without quotes).
  2. As soon as you're logged in, you will be given a list of the important paths YaBB will need to know before it can work. These paths will point to important YaBB files, your templates, avatars, attachments, etc. A number of these paths can be automatically picked up by the Setup Utility, but the content of your /yabbfiles/ folder will need to be entered by hand.
  3. With your paths in place, the next screen will give you the ability to set a few basic settings such as YaBB's time zone and the name of your forum. Please note that this page should look like the screenshot above. If not, one of the paths to your yabbfiles is incorrect.
  4. Finally, the Setup Utility will run a quick system test to make sure important files are where they need to be. When the check is over, your new YaBB community will be ready for use!
  5. Remember, your default username is "admin" and password is "admin". Be sure to change these right away!

Security Tip: If you are NOT converting from a version of YaBB 1.x, use your FTP client to delete 'cgi-bin/yabb2/Setup.pl' and 'cgi-bin/yabb2/Variables/setup.lock.' This will prevent anyone from tampering with your forum using the Setup Utility.