Parts I have for sale after the restoration.
NLA (No longer available)
NOS (New old stock)
Photo's can be taken of parts if required.
Bolt, fan extension, & Pulleyhub 320-090 pg65
Timing Cover NLA pg64
Cam bearing, Front 827-000 pg64
Std Camshaft 851-060 pg64
Full Rocker shaft Assembly
Oil pump assy pg64
Filter Assy pg64
Distributor housing with Tach drive Assy NLA
Breather Pipe NLA 851-010 pg62
Timing Chain, used 832-000 pg64
Tappets 838-250 Qty 8 pg66
Dipstick 851-000 pg62
Cover Clutch Housing NLA pg81
Sprocket Camshaft 838-000 pg64
Oil Pipe, (metal and the flex line) 836-570 pg63
Gear Driving Tach NLA 836-520 pg64
Shaft, oil pump drive 836-510
Aftermarket engine lifting bracket
Guide Starting Handle , Original 802-885 pg113
Knob, Overdrive (new) 633-645 pg138
Rod, vent control (new) 734-240 pg139
Bulb holder, Original Lucas 159-600 pg137
Speed nut kit, (new) for "TRIUMPH" 326-558
Mounting rubber for shocks, (new) 011-943 pg87
Spring Anti Rattle, (new) 582-055 pg102
Plate retaining brake caliper (new) 582-100 pg102
Plate retaining brake caliper (new) 582-045 pg102
Steering bushing rubber/nylon (new) 525-020 pg90
Rear oil seal gearbox (new) 520-090
Two copper brake hose washers. (new)
Two Chrome nut & bolts, for bumper (new) 322-900 pg113
Bracket center support with buffer (new) 802-700 & 680-490 pg117
Plate sealing rubber to floor (new) 579-510 pg104
Lucas style Repro R/H fender mirror. 165-210 pg15
Pedestal, generator mounting (NOS) Like 320-700 pg117
Hardtop, bridge piece & tapping plates, (5) 801-560 & 801-545
Generator brush set, (new) 147-200
Original chrome bezel for light switch, NLA
Spring return for clutch 329-485
Metal strips for straps in spare wheel compartment.
Two generators, both need rebuilding
Dust Cover 552-190 pg103
Gasket lens base 159-100 pg135
Rubber, stay rod retaining (2 used) 282-350 pg112
Extension for hub, (1) 837-520 pg65
Hub pulley 837-515 pg65
Pulley, front & back half, (2) 837-500/510 pg65
Pulley for water pump , (1) 835-250 pg68
Filterhead "Purator", (2) NLA
Filter bypass plate for an oil cooler, needs connections.
Fan, 4 bladed. (2) 834-030
Exhaust Manfold
Inlet Manifold
Gas Tank, very good
Rusty RH side screen
Trunk lid with very little rust
R/H front fender requires work
R/H door solid, but with panel damage
Check Straps 674-630
Lever Arm shocks (two) require oil
Frame front cross tube
Raised hinge platform hood, fair condition.
Rear bumper rider brackets
Prop shaft
Various front suspension parts
TR3 Std Gearbox
TR4 Std Gearbox
Front Grille, would be fine for a driver
Hood stick frame
Stripped TR3 frame requires only a little welding, have photo's
Starter motor core, (Later type for bolt on flywheel)
Water pump housing
Front Apron Tie member (Alloy) NLA
Spare wheel door, requires a little work.
Handbrake assy with compensator lever, bar& plate.