Neuro Technology Digistim 2 Plus For Sale

(click on image above to see full size picture)

Neuro Technology Digistim 2 Plus

The dual-purpose DigiStim 2 PLUS efficiently monitors muscle relaxants and precisely locates nerves in regional anesthesia procedures. The amount of current delivered to the patient is displayed in mA on a large, easy-to-read, digital LCD. In addition to the flash of the pulse LED, an audible indicator sounds as each stimulus pulse is delivered to the patient. Nerves can be located precisely: the low-level output is adjustable in 0.1-mA increments from 0 to 6.0 mA. With an optional computer interface (not included, available from manufacturer) can be used for evoked potential and EMG applications.

I purchased this unit with other medical related equipment a while back at a local auction. The unit offered is in good condition and when powered it up, the unit appeared to function properly. As with all items I sell, this unit is being sold "as is".

The unit offered is a Neuro Technology model Digistim 2 Plus
Low power consumption
Double-burst stimulation output mode
Automatic shutdown indicated by audible signal after 20 minutes of nonuse
Adjustable volume on beep-tone
SPECIFICATIONS
Standby Mode of Operation: All toggle switches at off (center position)
Double Burst 3,3 Mode of Operation: 2 60 ms bursts of 50 Hz separated by .75 s; single or automatic repeat every 10 seconds.
Twitch Mode of Operation: 1 s (1 pulses/s); single or repeat
Tetanus Mode of Operation: 50 Hz (50 pulses/s); 100 Hz (100 pulses/s)
Train-Of-Four Mode of Operation: Single (4 pulses/2 s); repeat (4 pulses/2 s; repeats every 10 s)
Output Current: 0-70 mA, adjustable in 0.1-mA increments (HI range) / 0-6.0 mA, adjustable in 0.1-mA increments (LO range)
Stimulus Pulse: Square Wave Monophasic pulses (200-us duration)
Display Resolution: 0.1 mA
Indicators: Digital LCD shows current delivered to the patient in mA, Battery LED (green) indicates that the unit is on; it flashes when battery voltage is low. Pulse LED (red) flashes each time a stimulus pulse is generated. Audible indicator beeps each time a stimulus pulse is generated and before the instrument automatically shuts down. The loudness of the beep is adjustable.
Power Source: 9-V alkaline battery (access door on rear panel)
Power Consumption: Approximately 4.9 mA
Mounting Bracket: Attaches to carts and IV or equipment poles
Case: High-impact ABS plastic with anodized aluminum front and rear panels. Switches and handles are chrome-plated.
Size: 2.5" H x 6.06" W x 6.25" D
Weight: 1 lb 10 oz, including battery
See pictures above for control locations and descriptions.
No operators manual is included.
No probes, wires, leads included in this sale.
See pictures above for what’s included and actual condition of components.
This unit is in good physical condition, but may have some tape/sticker residue, ID markings, and may have dust from storage. Some of the specs and features may have been taken from internet sources whose accuracy may be questionable. I don't know much about these, but if you have a question, e-mail me.

$349.99

Back to Main