NETTUR TECHNICAL TRAINING FOUNDATION
An ISO 9001
Training InstitutionQUALITY POLICY
SYSTEMATIC TRAINING IN PACE WITH LATEST TECHNOLOGY
COURSES OFFERED AT NTTF
3 years Diploma Programme followed by one year industrial training imparted at the six centres of NTTF -Bangalore, Dharwad, Tellicherry, Vellore, Gannavaram and Coimbattore.
Intake: 30 trainees per year in all Centres except Gannavaram & Vellore with 16trainees.
Eligibility: Candidates with a pass in School Leaving Examination with 60%in Mathematics and 60% in Science.
Age: Below 19 years. Height: 155cms. (Min)
Course Content: The trainees, during the course, learn to design and manufacture intricate tools like Press Tools, Plastic Mould, Die casting Dies, jigs & Fixtures and Gauges independently.
A FEW SEATS ARE RESERVED FOR INDUSTRY SPONSORED AND FOREIGN CANDIDATES UNDER INDUSTRY SPONSORED PROGRAMME
.A 3+1 year Diploma Programme conducted at NTTF Electronics Training Centre at Electronics City near Bangalore.
Eligibility: Candidates with a pass in school leaving Examination with 60% in Mathematics & 60% in Science.
Course Content: The Programme with emphasis in the field of 'MECHATRONICS' equips the trainees with electromechanical capabilities in different areas such as Electricity, Basic Electronics & Digital Electronics with enough practical exercises. Also Control, Communication Engineering, Microprocessor based systems and C.N.C.
A FEW SEATS ARE RESERVED FOR INDUSTRY SPONSORED AND FOREIGN CANDIDATES
A 3+1 year Diploma Programme conducted at NTTF Electronics Training Centre at Electronics City near Bangalore.
Eligibility: Candidates with a pass in school leaving Examination with 60% in Mathematics & 60% in Science.
Course Content: The Programme with emphasis in the field of 'MECHATRONICS' equips the trainees with electromechanical capabilities in different areas such as Electricity, Basic Electronics & Digital Electronics with enough practical exercises. Also Micro Controlers,different programming languages: "C", "c++", Windows, unix, Linux operating systems, Data Communication, Computer Networks, Data Base Applications, Internet Technologies, Web Designing, E-commerce, Pc Hardware, Software Dtandardisation and Quality Tools
A FEW SEATS ARE RESERVED FOR INDUSTRY SPONSORED AND FOREIGN CANDIDATES
A 2 year programme in Tool Engineering imparted at Post Graduation School NTTF Bangaore (Peenya) .
Eligiblity : Graduates in Mechanical Eng. or industrial & production Engineering.
Age : Not more then 26 years.
Selection : Through an Entrance Examination and interview.
Course Content: The programme aims to provide advanced design & production concept in tool engineering/ Product Design to Graduate Engineers with due emphasis on the practical aspects.
A FEW SEATS RESERVED FOR INDUSTRY SPONSORED AND FOREIGN CANDIDATES
A 3 year Diploma programme in tool fitting followed by special programme on rural technology imparted at NTTF Technical training Centre for Rural Youth & Disabled at Gannavaram.(Andhra Pradesh).
Intake : 16 trainees per year.
Eligibility : Candidates with a pass in SSLC with 45% in Mathematics and Science. Candidates passed out from Rural (panchayat) schools preferred.
Age : Below 19 years Height:155 cm.(min)
Weight : 40kg (min)
Selection : Through an Entrance Examination.
Course Content: The programme aims to provide a strong base in mechanical skill followed by training in the trades that have relevance to the rural community such as plumbing, welding, motor and pump repair, electrical wiring and maintenance of diesel engines.
The programme aims to create a cadre of rural technicians who will participate in and promote applicable technology through satellite service centres. NTTF will extend assistance to other rural development agencies to establish the above centres.
A 2 year programme in Tool & Die Making followed by 6 months of industrial Training offered at six training centres.
Intake : 16 per year.
Eligibility : pass in SSLC with 45% marks in Mathematics and 45% in Science.
Age :Below 19 years. Height & weight: as per other diploma courses.
Selection :Through entrance examinations .
Course content : Trainees learn the manufacturing technology of tools and dies like moulds, dies, press tools with adequate theoretical knowledge.
A FEW SEATS RESERVED FOR INDUSTRY SPONSORED AND FOREIGN CANDIDATES
One year programme in tool design imparted at Tellicherry and Dharwad Centres.
Intake : 15 per year
Age : not more than 26 years
Selection : Through an entrance examination and interview.
Course content :Course aims at providing practical design aspects for press tools and mould design. Relevant knowledge in related subjects are given including workshop exposure.
A FEW SEATS RESERVED FOR INDUSTRY SPONSORED AND FOREIGN CANDIDATES
The Training covers the trades of(a)fitter (b)miller (c)grinder(d)turner (e)maintenance mechanic (f)draftsperson (g)electrician and (h)metrologist. The training is conducted in all the centres. Duration of the training varies from one year to two years depending on the trades. In the area of electronics, the nonformal training will be imparted in i)P.C.B Assembly and testing. ii)Basic electronics, repair and maintenance.
Intake : varies from centre to centre depending on the availability of facilities.
Eligibility :For trades indicated candidates should have atleast appeared for 10th standard examination. for the metrologist course, the candidates should be plus 2 passed.
Age :for all trades below 22 years.
Selection :Through an entrance examination .
Course content :The trainees will be exposed to the bench work with relevant intensive training in the spective trades. Theoretical exposure will also the given in trade theory, workshop calculation and engineering drawing.
In the area of electronics, the trainees will be exposed to the principles of electricity, basic electronics, oscilloscopes, calibration of instruments etc.
The candidates on completion of training, will be able to handle their job with minimum supervision.
Preference is given to school drop-outs from the economically weaker section of the community. The non-formal training programme of Gannavaram Centre is provided for the physically disabled persons only. INDUSTRIES/FOREIGN COMPANIES CAN AVAIL THESE COURSES BY BLOCK BOOKING.
A two year programme split into Level 1 of first year and Level 2 of second year.
Intake : 20 per batch
Age : below 24 years
Eligibility : 1 year - SSLC passed. II year - First year CCCA-01 pass, B.Sc./Diploma.
Selection : Through an Entrance Examination.
Course Content: The course imparts training in computer application. The participants aquires skill in data entry, designing and developing of application software for engineering and commercial applications. The relevant engineering skills in machine shop, quality software, production management and more details on micro processor, computer peripherals, programming and applications in stages.
The Programme aims to impart appropriate input to Graduate Engineers and Diploma Holders and additional knowledge in tooling for practicing Engineers.
The Programme is conducted in Bangalore, Tellicherry and Dharwad Centres at present. Areas covered are tool design theory and tool design drawing. The duration is one year.
INTAKE :30 trainees per course - annually.
ELIGIBILITY : Diploma holders in Mechanical Engineering, Sponsored candidates from industries/institutions are preferred.
SELECTION : Through interview
COURSE CONTENT:
i) Tool design Theory : The Programme exposes the participants to the concept of design of press tools, plastic moulds, die casting dies, jigs and fixtures and cutting tools.
ii)Tool design drawing: The programmes impart the principles and practices in the design and drawing of press tools and plastic moulds.
NTTF conducts special course, tailor -made to suit each industry.
Courses were conducted for more than 50 industries over the last five years. Training was also provided for the candidates deputed from Tanzania, Nepal, Indonesia, Maldives, Srilanka and Mauritius . Courses can be offered in tooling subjects like press tools, moulds, jigs and fixtures and die casting dies, machining including C.N.C. machining. Electronic subjects like CAD/CAM,PCB Design fabrication and assembly, computer maintenance, microprocessor, electronic equipment maintenance. Training of trainers and training in supervisory skills.
These courses are of 40 hours duration with 1,2 or 3 lavels of competency
INDUSTRIES/FOREIGN COMPANIES CAN AVAIL THESE COURSES BY BLOCK BOOKING
.
