Site hosted by Angelfire.com: Build your free website today!
ENERGY SAVINGS AGREEMENT

Precision Tune-Up & Cleaning
  • This agreement provides you with a precision tune-up and Professional cleaning twice a year.
  • BENEFITS

    This is one of the most comprehensive service plans available, one that provides you with a superior preventive maintenance program.

    This plan is designed to extend the life of your heating and cooling units, and help cut costly repairs.

    This type of equipment service is industry recognized as the best way to maximize your energy efficiency, which in turn saves you money on heating and cooling costs.

    This preventive maintenance plan also promotes a safer environment for your family, by performing special safety checks that help guard against deadly carbon monoxide leaks.

    Repair parts not covered by this plan or manufacturer's warranty will be charged at prevailing list price.

    All repair parts and workmanship on work covered by this plan are warranted for 30 days from date of service.

    There will never be an overtime charge for your arrival/diagnostic.

    Repair services requested shall be provided during normal working hours, Monday through Saturday.

    Repair services requested by customer for other than normal working hours shall be charged at no overtime rate.

    To obtain service in either normal or emergency situations, simply call and you will receive Priority Service over non-plan holders.

    This plan is fully transferable to your new home (in our service area) or the subsequent owners of the current home, in the event you sell the home under which the agreement was originally written.


    SERVICE PERFORMED

  • 1- Run test, identify current problems if any; if OK start with #2
  • 2- Check air filter, replace
  • 3- Remove burners, inspect heat exchanger
  • 4- Remove circulating fan, clean
  • 5- Inspect secondary heat exchanger, clean
  • 6- If electronic ign., clean flame sensor
  • 7- Install new thermocouple
  • 8- Re-install burners
  • 9- Re-install blower fan & oil fan motor
  • 10-Check drainage
  • 11-Check venting
  • 12-Leak test gas piping
  • 13-Start unit
  • 14-Adjust primary air
  • 15-Check & adjust gas pressures 覧覧背.c.
  • 16-Intake air temp 覧覧@F
  • 17-outlet air temp 覧覧@F
  • 18-Temp rise 覧覧@F
  • 19-After 5 min. carbon monoxide test
  • 20-Amprobe test 覧覧 .A
  • 21-Adj. anticipator at thermostat 覧覧.A
  • Comments: